Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?
Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?
2020-12-13 10:09:08
Model: Archer C59  
Hardware Version: V4
Firmware Version:

Hi all,

 

moved me Deco system to my business location and wanted to reuse my Archer C59 at home.

Works fine, used to have 2 Wi-Fi networks for private use (Home1 and Home2) and 1 for Public use (Public1).

I noticed that the Public has opened automatically on 2,4 and 5 Ghz, although I don't think the router has Smart Connect (not in the app anyway). However, I tested to put Home1 now as SSID on both bands and it seems to work... probably not "Smart"?

Is this a good idea or should I avoid it?

  0      
  0      
#1
Options
7 Reply
Re:Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?
2020-12-15 05:46:51 - last edited 2020-12-15 05:48:27

Your router does have Smart Connect available via WebGUI. If I wanted the SSIDs on both bands to be the same, I would use Smart Connect on, rather than using the same name for SSIDs on both bands with Smart Connect off.

"Smart Connect allows each of the router's wireless bands to use the same wireless settings. The router can balance network demand and assign devices to the optimum band."

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?
2020-12-15 06:47:13

@Ivaylo I've searche every page on the WebUI, couldn't find Smart Connect, not in Basic or Advanced mode...

  0  
  0  
#3
Options
Re:Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?
2020-12-15 06:54:14 - last edited 2020-12-15 07:01:04

What's your FW version ? Are you sure that your HW version is 4 ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?
2020-12-15 07:05:53
I've upgraded yesterday. 1.0.2 Build 20160725 rel.57694 I'll go check for the HW-version.
  0  
  0  
#5
Options
Re:Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?
2020-12-15 07:09:59
It seems to be EU/1.0, that's probably V1 :(
  0  
  0  
#6
Options
Re:Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?
2020-12-15 07:16:59 - last edited 2020-12-15 07:23:58

@arbe 

 

You can check that from WebGUI (Advanced=>System Tools=>Firmware Upgrade):

 

For example:

If it's v1 then the Smart Connect feature is not implemented.

In that case you can have both bands with the same name, but I would recommend different names for 2.4 GHz and 5 GHz bands.

That's just to determine which band the particular device is connected to, nothing else.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#7
Options
Re:Setting the 2.4 and 5Ghz SSID to the same value: Smart Connect?
2020-12-15 07:22:37
Thanks, it is a V1 indeed. I have implemented a different SSID for my networks. The Guest Network I left as configured standard (same on both) and I noticed that the Playstation is a lot faster. Unfortunatly enough indeed I can't seen on the PS which network it has taken. :)
  0  
  0  
#8
Options