Home Network Community > Wi-Fi Routers > AX50 Not seeing gigabit speed within local network
< Wi-Fi Routers

AX50 Not seeing gigabit speed within local network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX50 Not seeing gigabit speed within local network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX50 Not seeing gigabit speed within local network
AX50 Not seeing gigabit speed within local network
2020-12-15 19:09:14 - last edited 2020-12-18 07:47:39
Model: Archer AX50  
Hardware Version: V1
Firmware Version: 1.0.9 Build 20200708 rel.55037(5553)

Hi,

 

I have two PCs within my home network connected directly to the router using Cat 6A cables and both PCs have gigabit ports, however when I'm only seeing tranfer speeds up to 680Mbit/s. I used iperf3 for these tests and can't seem to figure out what's happening here. I was looking through the router settings and saw that the SPI firewall is turned on, could this be causing the slowdown? Any other advice on how to diagnose or fix this? 

 

Thanks!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:AX50 Not seeing gigabit speed within local network-Solution
2020-12-17 05:43:12 - last edited 2020-12-18 07:47:39

@zzzzz 

I just updated my network driver and now  things seem to be running at gigabit, thanks!

Recommended Solution
  0  
  0  
#3
Options
3 Reply
Re:AX50 Not seeing gigabit speed within local network
2020-12-17 02:21:38
PCs in the LAN should not be affected by the SPI firewall - it's more about incoming connections from outside your LAN. Are you with the latest drivers for your LAN adapters. Have you tried with different cables ? The other thing you could try is to switch off as many services as possible (not needed) on your router and see if that matters.
If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:AX50 Not seeing gigabit speed within local network-Solution
2020-12-17 05:43:12 - last edited 2020-12-18 07:47:39

@zzzzz 

I just updated my network driver and now  things seem to be running at gigabit, thanks!

Recommended Solution
  0  
  0  
#3
Options
Re:AX50 Not seeing gigabit speed within local network
2020-12-17 07:04:44 - last edited 2020-12-18 04:44:54

Nice to hear it's been resolved. You can mark this thread as solved by marking a post as a Recommended Solution.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 723

Replies: 3

Related Articles
 WIFI speed much lower than expected within the local network
243 1
AX50 WAN speed limit
1041 0
AX50 WAN speed limit to 100M
3616 0
 Archer AX50 Client, network and speed issues.
453 0
Archer AX50 router doesn't support the ax3000 speed.
3496 0
 Suddenly AX50 dropped speed
514 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.