Home Network Community > Wi-Fi Routers > Opening ports on Archer AX10
< Wi-Fi Routers

Opening ports on Archer AX10

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Opening ports on Archer AX10

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Opening ports on Archer AX10
Opening ports on Archer AX10
2020-12-16 19:55:10 - last edited 2020-12-18 03:39:37
Model: Archer A10  
Hardware Version:
Firmware Version:

Hi guys,

 

Getting constant lag in Fifa (PC) and I thought I might try some port forwarding to see if it helps. However, the setup on the AX10 is a bit confusing to me. Should I use Port Forwarding or Triggering? Either menu requests some info which I'm not 100% sure where to get:

 

1. For Port Forwarding, I guess the ports I want to use go under 'External Port' (by the way can I input more than 1 in a single rule?). However, not quite sure what info to input into 'Service Name' (must it be one from the list?), 'Device IP Address' and 'Internal Port'.

2. Port Triggering asks me to select 'Common services', but none of them fit what I want to do. How should I proceed?

 

Thanks a lot for any help and have a great day,

VB

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Opening ports on Archer AX10-Solution
2020-12-17 00:35:21 - last edited 2020-12-18 03:39:37

To set up port interval fill the external port filed (9000-9999), leave the Internal port field empty and save.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:Opening ports on Archer AX10
2020-12-17 00:15:45
Check this reference to distinguish between these two - https://www.comparitech.com/net-admin/port-forwarding-port-triggering-differences/
If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Opening ports on Archer AX10
2020-12-17 00:23:15
Thanks, I managed to set it up eventually. The only thing I failed to do is setup an interval (9000-9999), but oh well. Rest is working like charm. Cheers!
  0  
  0  
#3
Options
Re:Opening ports on Archer AX10-Solution
2020-12-17 00:35:21 - last edited 2020-12-18 03:39:37

To set up port interval fill the external port filed (9000-9999), leave the Internal port field empty and save.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#4
Options
Re:Opening ports on Archer AX10
2020-12-17 13:31:12
That did it, thanks a lot :)
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 483

Replies: 4

About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.