AX20 vs2: switches for wifi and onemesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX20 vs2: switches for wifi and onemesh

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX20 vs2: switches for wifi and onemesh
AX20 vs2: switches for wifi and onemesh
2021-01-08 12:01:42 - last edited 2021-01-24 13:49:19
Model: Archer AX20  
Hardware Version: V2
Firmware Version:

Hi Kevin,

Instead of the C2300, I now look at the AX20v2 (according the Dutch site of TP-Link).

I have 2 questions about this router.

1. does the AX20vs2 has an on/off-switch for Onemesh ?

2. can wifi-5ghz be switched off, so that only wifi-2.4ghz is on and vice versa ?

Greetings and have a good 2021 !

 

  0      
  0      
#1
Options
2 Accepted Solutions
Re:AX20 vs2: switches for wifi and onemesh-Solution
2021-01-23 11:26:44 - last edited 2021-01-24 13:49:30

AX20 v1 supports OneMesh on/off switch, so I assume that AX20 v2 will support that too. As for the 5GHz band, it's the same assumption - on AX20 v1 you can enable/disable a particular band - it should be the same for AX20 v2.

 

The following is from AX20 v1

OneMesh button:

 

 

Wireless Settings:

 

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#3
Options
Re:AX20 vs2: switches for wifi and onemesh-Solution
2021-01-23 12:04:06 - last edited 2021-01-24 13:49:19

@Pieter75 

 

Yes, there are independent switch boxes for both bands - I just had a screenshot for 2.4 GHz band - it's the same for 5GHz band.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#6
Options
6 Reply
Re:AX20 vs2: switches for wifi and onemesh
2021-01-23 10:23:31

@Pieter75 

Unfortunately, to my surprise, I don't get an answer from Kevin from TP-Link to my questions in my above mentioned post. 

I couldn't find the answers in the online manual, that's why I asked the questions on this forum.

Does anybody know the solutions ?

Thanks in advance !

  0  
  0  
#2
Options
Re:AX20 vs2: switches for wifi and onemesh-Solution
2021-01-23 11:26:44 - last edited 2021-01-24 13:49:30

AX20 v1 supports OneMesh on/off switch, so I assume that AX20 v2 will support that too. As for the 5GHz band, it's the same assumption - on AX20 v1 you can enable/disable a particular band - it should be the same for AX20 v2.

 

The following is from AX20 v1

OneMesh button:

 

 

Wireless Settings:

 

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#3
Options
Re:AX20 vs2: switches for wifi and onemesh
2021-01-23 11:58:07

@Ivaylo 

Thanx for your answers 😁 !

  0  
  0  
#4
Options
Re:AX20 vs2: switches for wifi and onemesh
2021-01-23 12:01:45

@Pieter75 

Can you also switch off and on the 5 Ghz-wifi ?

  0  
  0  
#5
Options
Re:AX20 vs2: switches for wifi and onemesh-Solution
2021-01-23 12:04:06 - last edited 2021-01-24 13:49:19

@Pieter75 

 

Yes, there are independent switch boxes for both bands - I just had a screenshot for 2.4 GHz band - it's the same for 5GHz band.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#6
Options
Re:AX20 vs2: switches for wifi and onemesh
2021-01-24 13:49:00

@Ivaylo Thanks for the effort smiley !

  0  
  0  
#7
Options