Home Network Community > Deco > Printer has wrong ip address on Deco M4 network
< Deco

Printer has wrong ip address on Deco M4 network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Printer has wrong ip address on Deco M4 network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Printer has wrong ip address on Deco M4 network
Printer has wrong ip address on Deco M4 network
2021-01-11 15:43:22 - last edited 2021-01-13 11:10:26
Model: Deco M4  
Hardware Version: V2
Firmware Version: 1.4.3

I have a Brother Wi-Fi printer.  It is connected to the M4 network.  This is confirmed by the Deco app, the printer itself and by using the Get-Printer -full command.

 

Printer is in ready status but Windows 10 PC cannot see it or ping it.  This printer was working until I installed my new M4 network.  

 

I am trying to look at both ends of this issue going here and to Brother to try to determine which end is giving me the problem.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Printer has wrong ip address on Deco M4 network UPDATE-Solution
2021-01-11 19:31:18 - last edited 2021-01-13 11:10:26

@gwinegarden UPDATE!!

 

Worked with Brother Tech Support and they were able to determine that it was at the printer end.  They helped me resolve the situation.

 

Recommended Solution
  2  
  2  
#3
Options
4 Reply
Re:Printer has wrong ip address on Deco M4 network
2021-01-11 15:59:55

@gwinegarden 

 

Sorry the headline is incorrect!.  I had started to write that post but then determined that the ip address is correct.  Forgot to change the heading.

 

  0  
  0  
#2
Options
Re:Printer has wrong ip address on Deco M4 network UPDATE-Solution
2021-01-11 19:31:18 - last edited 2021-01-13 11:10:26

@gwinegarden UPDATE!!

 

Worked with Brother Tech Support and they were able to determine that it was at the printer end.  They helped me resolve the situation.

 

Recommended Solution
  2  
  2  
#3
Options
Re:Printer has wrong ip address on Deco M4 network UPDATE
2021-01-17 10:28:15
Can you summarize Brother's solution? I have a similar problem and I hate to start from scratch with Brother support.
  0  
  0  
#6
Options
Re:Printer has wrong ip address on Deco M4 network UPDATE
2021-01-17 14:06:38

@Microbrain I had been unable to use the software to fix the issue as it kept freezing.  I had also tried connecting, manually, through the control panel but I must have messed that up.  Support had me do a WiFi reset and redo the setup, manually, and it finally worked.

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 903

Replies: 4

Related Articles
Fixed IP address for the second Deco M4 device
5797 0
 Deco M4 not getting WAN ip address
346 2
 Deco M4 printer compatibility
458 0
What is DECO M4 LAN/WAN MAC address ?
2279 0
Deco M4 WAN Port Mac Address
4475 0
Deco M4 - Network connected devices
1353 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.