TP-LINK Archer AX1500 Access Point mode - No internet connection
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.TP-LINK Archer AX1500 Access Point mode - No internet connection
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I've recently bought Archer AX1500 router and wanted to set it up as Acess Point. I was able to do so but I'm not able to reach the Internet through it.
Here are my main router settings, to which I'm connecting the new Archer AX1500 in AP mode (using ETH cable):
- IP: 192.168.100.1
- Subnet mask: 255.255.255.0
- DHCP server: ON
- DHCP server addresses range: 192.168.100.5 - 192.168.100.199
After logging in to the router, I've switched it to Access Point mode and Setup WiFi networks (changed SSID and password) and no other settings were changed.
I've connected my new Archer AX1500 using its WLAN port to my main router LAN port (this is how the picture, while switching to AP mode, showed).
This configuration did not work for me - no Internet.
Next, I've configured Archer AX1500 LAN settings:
- Changed its IP to static: 192.168.100.3
- Subnet mask: 255.255.255.0
- Default gateway: 192.168.100.1
- Disabled DHCP
I've tried connecting Archer AX1500 using both WLAN and one of LAN ports to my main router LAN port, the result is the same - no Internet.
The cable I connect both routers with should be fine because I've used it to configure the new Archer AX1500 router.
I can see on my main router that the Archer AX1500 is connected to its LAN port with the IP 192.168.100.3 and it's online.
I have another router functioning as AP (TP-Link TL-WR1043N/ND v2). This router is configured the same as my new Archer AX1500 with the change to the IP address which is 192.168.100.2 and it functions properly (I have access to the Internet, I've been using it for few years now).
Any suggestion why I cannot reach the Internet using my new TP-LINK Archer AX1500 router?
Thanks in advance.
Best regards,
Dawid
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Ivaylo
Sorry for late response but I had to leave this case for a while to take on other responsibilities.
Here's current status:
- Updated DHCP range to 192.168.0.4 - 192.168.0.249
- I've performed factory reset on AX1500.
- Updated firmware to the latest one on AX1500.
- Setup the AX1500 as AP like in the post you've linked (this configuration didn't work either).
- Switched mode to AP on AX1500 and configured it as previosly (still no connection to Internet).
One thing I've noticed is that while I was connected to the AX1500 via cable, the name of the network was actually the name of WiFi which is broadcasted by the second (properly working) router configured as AP on 192.168.0.2. Does this mean something? Can those 2 interfere with each other somehow?
Here is how I configured my both, ethernet and WiFi cards on my laptop to static IPs:
Ethernet:
WiFi:
The language of my system is Polish but I doubt you won't know which field in the form is responsible for what.
- Copy Link
- Report Inappropriate Content
I am OK with these screenshots, but it is interesting for me to see them, when you have set the IP address to be obtained automatically (by DHCP, when the PC connected to to the AX1500).
- Copy Link
- Report Inappropriate Content
@Ivaylo
OKAY...
So I've disconnected the second router functioning as the AP and the AX1500 got access to the Internet! FINALLY!
I've reconnected the second AP, and now, this one doesn't have access to the Internet.
So the cause is that I have 2 routers functioning as Access Points and for some reason this doesn't seem to be working for me.
Any ideas on how to setup those 2 so I can enjoy the Internet on both of them?
- Copy Link
- Report Inappropriate Content
Well, that's a progress...Lets have a look at the TL-WR1043N/ND settings then. How you have configured that one as AP. Can you post WAN / LAN / DHCP settings screenshots ? Which ports are you using on TL-WR1043N/ND to connect to the main router ? I assume you are using the second scenario which I suggested earlier for AX1500. Is it with the latest FW ?
- Copy Link
- Report Inappropriate Content
@Ivaylo
I've resolved the issue by connecting my old router functioning as AP to the new Archer AX1500 LAN port.
After that, I have access to the Internet on both of them.
Now only the new Archer AX1500 router in AP mode is connected to the main router.
I've also adjusted both Acess Points WiFi settings (channel and width) and turned of the main router WLAN for maximum WiFi network performance.
I can finally enjoy the Internet on both of them.
That was harder than expected to make all of this up and runing.
So if anyone stumples upon same issue, I hope this thread will help them.
@Ivaylo thanks a lot for trying to help me!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 15364
Replies: 15
Voters 0
No one has voted for it yet.