Archer AX73 Connection issues with all devices
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello Fans of Tp Link,
I used one old router Tp link Archer C20i and decided to change. From Monday (1.02.2021) I had a new baby Archer AX73. Configure all settings and turn on.
What I found is that most of my devices droped or connection dissapear even wired one. I tried to check the logs but I found only following:
2021-02-05 19:28:18 Led Controller INFO [1101] Start to run WAN1_ON
2021-02-05 19:28:18 Led Controller INFO [1101] Start to run WAN0_OFF
2021-02-05 19:28:18 Led Controller INFO [1101] Start to run LAN_ON
2021-02-05 19:27:38 Led Controller INFO [1101] Start to run WAN1_ON
2021-02-05 19:27:38 Led Controller INFO [1101] Start to run WAN0_OFF
2021-02-05 19:27:38 Led Controller INFO [1101] Start to run LAN_ON
2021-02-05 19:27:36 UPnP INFO [11233] Service start
2021-02-05 19:27:35 UPnP INFO [11233] Service stop
2021-02-05 19:27:33 Remote Management INFO [10905] Service stop
2021-02-05 19:27:24 NAT INFO [9160] IPSEC ALG enabled
2021-02-05 19:27:24 NAT INFO [9160] L2TP ALG enabled
2021-02-05 19:27:24 NAT INFO [9160] PPTP ALG enabled
2021-02-05 19:27:24 NAT INFO [9160] SIP ALG enabled
2021-02-05 19:27:24 NAT INFO [9160] RTSP ALG enabled
2021-02-05 19:27:24 NAT INFO [9160] H323 ALG enabled
2021-02-05 19:27:24 NAT INFO [9160] TFTP ALG enabled
2021-02-05 19:27:24 NAT INFO [9160] FTP ALG enabled
2021-02-05 19:27:22 Traffic Statistics INFO [7478] Clear all stats because time changed
2020-09-07 00:00:37 NAT INFO [9160] Initialization succeeded
The firmware is the newest possbile on the device.
I switch off the OFDMA and TWT to tried without this. Only Smart connect is enable (this is one of the reason why I bought).
In comparison of Archer 20Ci, event 2,4Ghz radio is small which is little surprice for me.
From where I can start to fix the issue with connection?
Thank you in advance.
BR
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Ivaylo
For the internet port, I think 'yes' this is correct.
I use this home NAS for more than 5 years with 2 old routers without any problems.
I'm surprised. What to stop i have only 2 services :) networking and ftp
Thanks for your time!
- Copy Link
- Report Inappropriate Content
Really surprising if you are sure that the NAS is causing the issue. Don't know what to suggest here...have you tried using a different cable/port for connecting the NAS ?
- Copy Link
- Report Inappropriate Content
@Ivaylo
yes of course, this was the first try :)
If I do not use NAS rooter is fine.. if I start watching a movie on tv or on a laptop .. after 3-5 min the rooter is rebooted.
this is my last information - I stopped all NAS services only windows networking is working.
- Copy Link
- Report Inappropriate Content
How heavy is the traffic when you watching a movie ?
I wonder, if you download a movie from a torrent tracker to your PC, will that cause the issue ? Or if you download to the NAS directly ?
Is the issue isolated to only when using the NAS device - big network transfers (copying files) from PC to NAS and vice versa ?
Try disabling Wireless Multicast Forwarding (if enabled), reboot the router and test again:
- Copy Link
- Report Inappropriate Content
@Ivaylo
yes i think nas connection is a problem.
I changed speed to 100Mbs and disabled all Multicast ..
my movies are on NAS (downloaded previously) . when start watching .. and bam reboot.
if I have time I planned to connect nas to another router.. and router to router via wifi, to eliminate lan port
or get some other nas from a friend to test.
Do you know for other firmware realase or other firmare tested on this hardware?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Ivaylo
maybe the problem is in firmware .. now I try to open downloadStation in NAS .. and add some torrent. torrent won't start even nat port forwarding rule is correct.
router reboot .. and another one .. new reboot
- Copy Link
- Report Inappropriate Content
Are you sure about the port - 8899 ? I've seen this port used for ONVIF protocol.
I saw this in QNAP manual:
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
This solves many issues as well. Do that by the reset button on the back. Then re-configure from scratch.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 10861
Replies: 38
Voters 1
