Deco M4 select signal source
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I got 3 deco M4 device, 1 as main (AP mode) and slave 1 and slave 2.
Main deco and slave 1 are located at ground floor while slave 2 is located at floor 1.
Main deco is located under the stair so the signal strength is weak a bit, but the speedtest done when client device connect to slave 1 still good.
Problem here is slave 2 connect to main deco instead of slave 1 when slave 1 have greater signal strength compare to main deco.
I saw another post Deco M5 source signal selectable? got release beta firmware for M5 model.
May i know when will m4 beta firmware release? or does it have any other temporary solution?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Healy903 Please share an beta fw for M4 :(
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I don't kwow why It Is taking so long. I Will change mesh system very soon if the new firmware won't arrive within the end of September
- Copy Link
- Report Inappropriate Content
@Fabio25 : not only the product. what i want to mention here is the way they support customer! Maybe this is the last time i buy TPLink products and I will share my opinions about TPLink that not to buy their products.
For @TP-Link and your team: In my country, the price for mesh wifi deco is expensive. I purchase 5 pack of deco and I hope that the price will suits to the quality of products, customer services! But this is so DISAPPOINTED! In Vietnam i have to call so many times without response! Email, communication etc... That is the ways you guys treat to customers!? And over a year you guys can not release the firrmware for all the mesh products that optional to select the signal soure which is have to be on the mesh system like DECO ! I have both E4 and M4 and now i know i buy the rubbishes!
This is the last mention to you @TP-Link . I will return the product !
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link I'm running 3x M4 devices all on fw 1.5.0 and they are lined up master > slave1 > slave2 where master is at the left-most part of the house (where the inbound phone line comes in) slave1 is in the middle of the house and slave2 is at the far right hand end of the house.
When I reboot slave2 it firstly connects properly to slave1 but if I leave it a few hours it reverts to selecting master as the source and as a consequence the speeds drop significantly as the signal is a lot weaker.
I understand that the beta fw which allows M4 to select the signal source is not compatible with the 1.5.0 firmware but is there a solution to this issue you can help with? Thanks!
- Copy Link
- Report Inappropriate Content
@TP-Link any news about the new firmware? 3 months later there is no news, and I think all with an m4 satellite needs this function.
- Copy Link
- Report Inappropriate Content
@TP-Link Getting a little tired of waiting for this. There surely should be some sort of road map. I'm pretty certain there is a human working on this update that can be sent an email for a progress report. Really wishing I hadn't purchased these.
- Copy Link
- Report Inappropriate Content
I've been monitoring this threat for a while after posting 10 weeks ago.
Unfortunately, for all; I believe @TP-Link has deliberately chosen to not respond in this topic as either there is not an update coming, or customersupport agents are also kept in the dark.
I gave up hope, and will warn others at my ISP for this flaw in the M4
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 20348
Replies: 80
Voters 8
