Deco m9 plus router mode setup and internet conection performance. All problems solved.
Yes configure deco for active is easy same all post I was read.
The point is configuration for good performance internet also for no travels with infernet signal , conection and speed.
The next post I explain what I test sucsessfull after 6 months test.
Is not easy find and matching settings configuration for no travels and good internet conection and speed.
The problem with deco actually are empty defect configuration after this deco became not same usefull and not ready for good job.
Deco master and router in floor 3
Repeater 1 in floor 3
Repeater 2 in floor 2
Repeater 3 in floor 1
Ipv6 configured is important for work internet very fast.
No prefix delegation
*or pppoe direct to router wan conection
ipv6 or no proxy
only like this work very fast internet also using dns ipv6 cloudfare
*And The most estable and always good conection ipv6 are with 6t04 tunnel
About wifi configuration the best performance internet with deco are only with this wifi configuration:
* wifi base 2,4ghz+5ghz ghost only for administration and help for conection performance.
*Wifi guest diferent ssid with 2,4ghz+5ghz wifi for use
*Router dns just same deco master dhcp
*Deco master dhcp
Dns2 0.0.0.0 (empty)
*IGMP option active from deco web administration
all this configuration and options in deco m9 plus are tested and only like this improve internet without problems and travels.
I strong recomend tp-link and deco service include and add defect configuration automatic in deco master.
Maby Using assistant in deco app asking for conection type and router ip.
after this automatic process deco master same ip with diferent subnet and automatic fill all dns and defect configuration .