Restore original firmware of TL-WR820N

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Restore original firmware of TL-WR820N

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Restore original firmware of TL-WR820N
Restore original firmware of TL-WR820N
2021-05-13 22:08:34
Model: TL-WR820N  
Hardware Version: V1
Firmware Version: TL-WR820N(ES)_V2_200731

Hello there, I have this router that have a updated version of software but its region is EU and the firmware that I installed was ES region. The question is that when the update process finished, the router configuration remained intact, however the 192.168.1.1 web interface no longer works, when entering a blank page appears. I want to reset the factory firmware and I have searched everywhere for how to do it, I need some help.

  0      
  0      
#1
Options
2 Reply
Re:Restore original firmware of TL-WR820N
2021-05-13 22:28:03
TL-WR820N(ES)_V1_190905* that's the firmware version that i have installed now
  0  
  0  
#2
Options
Re:Restore original firmware of TL-WR820N
2021-05-13 23:20:48 - last edited 2021-05-14 12:38:24

@Lyndoon 


You can hard reset (method 1) the router and login via ethernet cable on 192.168.0.1

(or try on 192.168.1.1 if the former is inaccessible) - how to find your router IP address.

On the bottom of the device there's a sticker on which a HW version and the region is printed - see this FAQ.

According to this information you can determine the right FW version for your router.

Upload the latest FW release for your router based on the information in previous step.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 497

Replies: 2