old Huawei router to my new TP-Link Deco M4 Mesh with a wired connection
Hi, i have a room where the connection is not ideal from the M4 mesh however i have an Ethernet cable and an old router that works now as an access point but with a different SSID and it is connected to the ISP router, because the main M4 node have both ports busy, can i connect to another M4 node with a cable and get the same SSID and no ip looping? or do you have any suggestions to connect with an Ethernet to an old router, in that room i need a good internet so a wps wont work and i cant relocate any M4 nodes. thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
sobayorg wrote
... it is connected to the ISP router, because the main M4 node have both ports busy ...
To help with finding solution, I would need you to answer this for me:
1. What is connected to second port of Main Deco?
2. Do you have iPTV function enabled or disabled in Deco mesh? See How to Configure IPTV function on Deco? that explains where this setting is.
- Copy Link
- Report Inappropriate Content
1. another deco
2. disabled
i might add, the network works fine but one room that is far.
- Copy Link
- Report Inappropriate Content
my connection now [old router]----<[ISP Router]>----[Main Node]>----[2nd Node]
[Main Node]>>>[3rd Node]
but i need to change the ssid when im in old router room
what i want [ISP Router]>----[Main Node]>----[2nd Node]>----[old router]
[Main Node]>>>[3rd Node]
and quick and smooth network switching and one ssid
- Copy Link
- Report Inappropriate Content
Then, I may have an easy solution for you.
Get generic 5-port gigabit switch, they are quite cheap nowadays. Connect it to second port of Main Deco, you now have 4 available Ethernet ports coming from Main Deco instead of one.
You can use one port on switch to connect your "another deco," and will be left with 3 available Ethernet ports coming from Main Deco.
Retire your old Huawei router. Instead, buy additional Deco M4 or M5, and connect it by Ethernet cable you already have to that new switch.
- Copy Link
- Report Inappropriate Content
im planning to buy an additional M4 nodes but for time being...
is it possible to connect the old router to a secondary node that is connected to the main node via ethernet?
- Copy Link
- Report Inappropriate Content
Yes, it is possible, but that won't give you same SSID and seamless mesh. Instead, connect additional M4 you plan to buy to a secondary Deco node you already have, using Ethernet. That should work.
In any case, I suggest you decommission your Huawei router and think how can you expand your WiFi mesh without it.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2732
Replies: 6
Voters 0
No one has voted for it yet.