Archer C20 does not react at a network, even when its connected
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C20 does not react at a network, even when its connected
I connected a Ethernet cable to my C20 and my modem. The C20 didn't and doesn't know, that a modem is connected. It seems like there is an error. Please Help me tp-link!
Re:Archer C20 does not react at a network, even when its connected
Check your C20 Internet port status:
If C20 Internet port states Unplugged even the cable to the modem is connected, then use another cable CAT 5E/6 or another modem LAN port to connect.
Then observe the C20 internet port status again.
If this was helpful click once on the arrow pointing upward.
If this solves your issue, click once the star to mark it as a "Recommended Solution".
Re:Archer C20 does not react at a network, even when its connected
Use a computer browser to access the router settings.
If that's not your router interface a screenshot would be helpful to determine your device model and HW version - here's how can you do that.
Or you can see that here:
If this was helpful click once on the arrow pointing upward.
If this solves your issue, click once the star to mark it as a "Recommended Solution".