Does TG-3269 supports wake on lan?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Does TG-3269 supports wake on lan?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Does TG-3269 supports wake on lan?
Does TG-3269 supports wake on lan?
2013-06-28 09:52:25
Region : Malaysia

Model : TG-3269

Hardware Version : V3

Firmware Version :

ISP :


Hi there,

Would like to know if this NIC supports wake on lan. If it does, is there any settings to get the wake on lan feature working.

Thanks
  0      
  0      
#1
Options
2 Reply
Re:Does TG-3269 supports wake on lan?
2013-06-30 14:55:40
TP-link tech guy told me days ago that only TG-3468 supports WOL.
  0  
  0  
#2
Options
Re:Does TG-3269 supports wake on lan?
2014-06-28 04:23:02
I'm using TG-3269 with debian server. Ethtool said that my lan adapter supports WOL, but WOL does not working.


[CODE]*-network
description: Ethernet interface
product: RTL8169 PCI Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 7
bus info: pci@0000:01:07.0
logical name: eth1
version: 10
serial: 64:66:b3:04:e4:04
size: 1Gbit/s
capacity: 1Gbit/s
width: 32 bits
clock: 66MHz
capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.33.6 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=1Gbit/s
resources: irq:19 ioport:d800(size=256) memory:dbfffc00-dbfffcff memory:dbfc0000-dbfdffff[/CODE]

[CODE]
Settings for eth1:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Link partner advertised pause frame use: Symmetric
Link partner advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g

Current message level: 0x00000033 (51)
drv probe ifdown ifup
Link detected: yes[/CODE]
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1190

Replies: 2

Related Articles