Unable to connect to internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to connect to internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to connect to internet
Unable to connect to internet
2013-03-31 22:55:17
Region : Malaysia

Model : TL-WDR4300

Hardware Version : V1

Firmware Version :

ISP : TM UNIFI


Hi, I have recently bought a dual band router to replace the aging default router supply by the ISP.

After setting up, I found the message "No Internet Connection".

I have checked the log and found that PPPoE was connected. However I am connect to the internet.

Hope that someone could advice a solution.

Thank you.
  0      
  0      
#1
Options
7 Reply
Re:Unable to connect to internet
2013-04-01 00:26:54
Hi I have brought a TL-WDR3500 and have the same issue as yours. Having tried to disable NAT does not help. The wireless connections are OK. Hope somebody help. Thanks
  0  
  0  
#2
Options
Re:Unable to connect to internet
2013-04-01 02:30:12
Can you access the Internet if you connect your computer directly to the modem, thereby bypassing the router? If you can then try cloning the computer's MAC address into the router.
  0  
  0  
#3
Options
Tried all 4 methods in the FAQ, no luck
2013-04-01 13:43:35
Without Router, internet is OK, the cable modem is D-Link DCM-202, Comcast ISP
  0  
  0  
#4
Options
Re:Unable to connect to internet
2013-04-01 15:19:40
Is there any ip conflicts between the modem and the TP-LINK router? If wireless is working, then check the physical connection between the router,modem and computer.
  0  
  0  
#5
Options
Re:Unable to connect to internet
2013-04-01 23:35:53
have tried all the suggested method....so far no luck.....
  0  
  0  
#6
Options
Re:Unable to connect to internet
2013-04-02 01:43:31
Log into the router. Under Network-WAN, make sure WAN Connection Type is set to Dynamic IP. That's what I use for Comcast and a WDR3600. Then power off the router and modem and re-power both.
  0  
  0  
#7
Options
Re:Unable to connect to internet
2013-04-03 23:33:34
got the thing fix after talking to tp link support. flash the latest firmware, restore factory settings and reconfigure the router and voila....everything works....but somehow the signal for 5ghz is very weak. hmm...
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 976

Replies: 7

Related Articles