Archer AX11000 2.5GB port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer AX11000 2.5GB port

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer AX11000 2.5GB port
Archer AX11000 2.5GB port
2021-10-05 03:29:49
Model: Archer AX11000  
Hardware Version: V2
Firmware Version: AX11000(US)_V1_210719

I'm tryinging to connect 2Gbps Internet to 2.5WAN port but speed can get only 1Gbps. Is the 2.5Gb port is working?

Or, I can reach only 1Gbps right now? If so, any plan to unlock the speed and when?

  0      
  0      
#1
Options
1 Reply
Re:Archer AX11000 2.5GB port
2021-10-05 12:03:02

@MAXiMUSMX-TH 

 

 

Go to this menu:

 

 

scroll down to the bottom of that page and observe the negotiated speed of the WAN (Internet) port:

 

 

If the negotiated speed is 1000mbps full duplex then check this setting:

 

 

If the setting is on Auto Negotiation then probably the port of the equipment before the AX11000 is 1000mbnps capable and that's why you can't negotiate more bandwidth.

To achieve 2.5gbps you have to use an CAT6/6A ethernet cable and the port of the equipment to which the AX11000's WAN port is connected, should be 2.5gbps capable.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  4  
  4  
#2
Options