Business Community > Controllers > Bind TP-Link ID: "Failed to get response from the server"
< Controllers

Bind TP-Link ID: "Failed to get response from the server"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bind TP-Link ID: "Failed to get response from the server"

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bind TP-Link ID: "Failed to get response from the server"
Bind TP-Link ID: "Failed to get response from the server"
2021-11-21 20:26:54 - last edited 2021-11-24 05:58:29

@Fae : I tried to follow your advice in my previous thread: https://community.tp-link.com/en/business/forum/topic/509870?replyId=1018420

I tried upgrading my Omada Software Controller: Version 4.2.11  => Version 4.4.6.

 

What I did:

  1. Back-up data and settings
  2. Stop the old Docker container
  3. Start a new one based on the latest version
  4. Restore everything
  5. Login and bind TP-Link ID

 

Everything worked fine, except step 5.  Every time I try this,

I get the same error message: "Failed to get response from the server".

 

Any idea what went wrong?

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Bind TP-Link ID: "Failed to get response from the server"-Solution
2021-11-23 12:30:23 - last edited 2021-11-24 05:58:29

@Fae I was able to get it working.  By not using the webapp, and by using the iOS app instead.

Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:Bind TP-Link ID: "Failed to get response from the server"
2021-11-21 20:41:46

PS: this is the exact same problem:

https://uonfu.com/q/mbentley/docker-omada-controller/62/674383175

 

The suggested solution doesn't work:

I'd suggest checking to see if you're doing any sort of ad blocking that could be interfering with the ability to communicate to the cloud service.

 

I tried again without PiHole or AdBlock enabled, and the problem persists.

  0  
  0  
#2
Options
Re:Bind TP-Link ID: "Failed to get response from the server"
2021-11-23 02:50:35

Dear @FlashWeave,

 

FlashWeave wrote

Everything worked fine, except step 5.  Every time I try this,

I get the same error message: "Failed to get response from the server".

 

It seems that the controller cannot communicate with the cloud server.

 

Are you able to ping the external IP addresses on your docker to check the Internet connectivity?

Is there any log information on your docker when you try to login and bind your TP-Link ID but fail?

 

If you don't mind, please send me your TP-Link ID via private message so that I can check if there is any related log from the cloud.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#3
Options
Re:Bind TP-Link ID: "Failed to get response from the server"-Solution
2021-11-23 12:30:23 - last edited 2021-11-24 05:58:29

@Fae I was able to get it working.  By not using the webapp, and by using the iOS app instead.

Recommended Solution
  0  
  0  
#4
Options
Re:Bind TP-Link ID: "Failed to get response from the server"
2021-11-24 05:58:20

Dear @FlashWeave,

 

FlashWeave wrote

I was able to get it working.  By not using the webapp, and by using the iOS app instead.

 

Thank you for your valued feedback. Glad to know that you have resolved the issue finally.

 

As for the upload stats issue you posted in this thread, I'll keep you informed there once there is an update from the R&D team.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 839

Replies: 4

About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.