Home

Forums

Stories

Knowledge Base

Business Community > Controllers > Help Omada Topology

< Controllers

Help Omada Topology

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Help Omada Topology

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Help Omada Topology

jhon7

2021-12-02 13:53:29 - last edited 2021-12-07 07:02:41

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-12-02

Help Omada Topology

2021-12-02 13:53:29 - last edited 2021-12-07 07:02:41

Model: TL-SX3016F

Hardware Version: V7

Firmware Version:

Hi,

sorry I am new, and I would like your help for check my topology and the devices before to buy.

I would like to setup and speed network 100% manage by omada.

The internet come from WAN/LAN1. Really I will use about 9 switches but for simplify I show you only 4.

My concert is if I am usgin right the Switch SPF+ TL-SX3016F

Devices:

https://www.tp-link.com/es/business-networking/all-omada/

Switch TL-SX3016F

Router ER7206

Switch TL-SG3428XMP
Controller OC 300
Cable SPF TL-SM5220-1M
Transceptor TL-SM5110-SR

Network:

thanks so much.

3 Reply

jhon7

LV1

2021-12-02 13:55:12 - last edited 2021-12-07 07:02:41

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-12-02

Re:Help Omada Topology

2021-12-02 13:55:12 - last edited 2021-12-07 07:02:41

@jhon7 picture details

John1234

LV4

2021-12-03 05:42:57 - last edited 2021-12-07 07:02:41

Posts: 502

Helpful: 67

Solutions: 12

Stories: 0

Registered: 2021-05-21

Re:Help Omada Topology

2021-12-03 05:42:57 - last edited 2021-12-07 07:02:41

@jhon7

What's the point of using sg2210P while it has an SFP port? You're running SFP+ for the rest of your network?

(maybe you need your local network fast? then, that makes sense)

Fae

2021-12-03 07:13:56 - last edited 2021-12-07 07:02:41

Posts: 3603

Helpful: 1360

Solutions: 474

Stories: 0

Registered: 2020-06-30

Re:Help Omada Topology

2021-12-03 07:13:56 - last edited 2021-12-07 07:02:41

Dear @jhon7,

jhon7 wrote

sorry I am new, and I would like your help for check my topology and the devices before to buy.

I would like to setup and speed network 100% manage by omada.

The internet come from WAN/LAN1. Really I will use about 9 switches but for simplify I show you only 4.

My concert is if I am usgin right the Switch SPF+ TL-SX3016F

Welcome to TP-Link Business Community!

The TL-SX3016F switch is usually used in the core layer of a middle-sized business network, while the TL-SG2210P switch is normally used in the access layer. May I know your application scenario and your purpose of the topology? What devices will be connected to the downlink TL-SX3016F switches?

If you just want to connect the ER7206 router to the first TL-SX3016F switch, you may use a Media Converter like MC200CM to replace the TL-SG2210P (with a 1G SFP slot) and one 10G SFP Cable TL-SM5220-1M.

As you may find that there is no Ethernet port on the TL-SX3016F switch, if your end clients are some Ethernet devices, you may replace the downlink TL-SX3016F switches with a TL-SG3428X or a TL-SG3428XMP (it supports PoE out). By the way, using Ethernet Cat5e or above cable should be enough.

Hope the information above helps.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*

Help Omada Topology

Help Omada Topology

Devices:

Network:

Information

Voters 0

Tags