M4 - I would like to see my 3 NAS servers , which are on my LAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have a LAN on 192.168.1.xxx coming from my 2nd router (Sitecom WLR-9500)
On this LAN , I have 2 x Synology NAS & 1 Thecus NAS
On this router ,my main M4 unit is connect via a CAT6 cable
The unit creates a WLAN : 192.168.68.1
obviously , these 2 networks have a different IP address , causing my DECO WLAN not to see my other LAN, which I would like to enable
What is the best way to do that ?
Many thanks in advance for your help
KR, Sven
The best way to solve that issue is to reconfigure Deco to run in Access Point mode. That will bring all your devices, wired and wireless, to the same 192.168.1.* network and they will be able to communicate with each other.
This is where you can do that change in Deco app, under More/Advanced:
The best way to solve that issue is to reconfigure Deco to run in Access Point mode. That will bring all your devices, wired and wireless, to the same 192.168.1.* network and they will be able to communicate with each other.
This is where you can do that change in Deco app, under More/Advanced: