ER605 IPTV configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am writing with translation from Turkish to English. Sorry for the spelling.
I receive iptv service through the internet service provider in my region. There are no iptv settings on the ER605. However, this setting is included in the other tp-link tl-r480t interface. Will there be an update on this for ER605?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @kadir.altin,
kadir.altin wrote
I am writing with translation from Turkish to English. Sorry for the spelling.
I receive iptv service through the internet service provider in my region. There are no iptv settings on the ER605. However, this setting is included in the other tp-link tl-r480t interface. Will there be an update on this for ER605?
Welcome! But I'm afraid that ER605 V1 doesn't support IPTV at present.
This has already been forwarded to the TP-Link team for evaluation.
FYI, the IPTV function will be added back in the subsequent firmware updates. Cheers!
- Copy Link
- Report Inappropriate Content
@Fae thanks for your answer. Sorry for the delay.
I will be waiting for the update. Will this update be valid within the Omada SDN interface?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@N_W - Could you show us your IPTV settings? I have problems with configure the IPTV on the OC200. Thanks!
- Copy Link
- Report Inappropriate Content
Dear @Hoane,
Hoane wrote
@N_W - Could you show us your IPTV settings? I have problems with configure the IPTV on the OC200. Thanks!
The IPTV config is added in Controller v5.1.7, under Settings -> Services -> IPTV, you may check for an update from this post.
To use IPTV function, please also ensure your ER605/ER7206 firmware is upgraded to firmware 1.2.0.
- Copy Link
- Report Inappropriate Content
Hello @Fae
Thanks for your reply.
See this topic on the forum:
https://community.tp-link.com/en/business/forum/topic/542346?replyId=1065414, message from "NHendriks":
Re:Solcon IPTV and Omada
Same here with KPN. A lot of Dutch ISP's use routed IPTV and requires IPTV_RG to be sent with DHCP Option 60 on WAN and a local DHCP-server is required for the TV decoders. A lot of them, for example KPN use both the internet VLAN (6) and the IPTV VLAN (4) for working tv. With KPN the multicast being sent over VLAN 4 and all the meta-data, guide, OTT-content and all other stuff is sent over VLAN 6.
I thought the new options would finally make it possible to install IPTV but it's so limited that I'd rather not have it.
I also have this problem with IPTV form my ISP (KPN in the Netherlands).
Is there a way to solve this in the current Firmware of the OC200 or in a newer Firmware?
- Copy Link
- Report Inappropriate Content
It was an exaggeration to state that IPTV works..., long story short - it does not.
Similarly to the already mentioned Dutch ISP, here in Poland the TV boxes require access to 2-3 separate VLANs the same time (Orange, 35/838/839); simple IPTV (839) activation (multi cast) allows to watch TV, but the list of channels and VOD will not work (that means after some time it will stop working, TV box will not be able to restart itself). The original router must be doing VLAN trunking, but this option is not available in ER605. As such I have connected TV directly to Orange router (Funbox), access to ER605 can be exposed on individual TCP ports in my case.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4647
Replies: 7
Voters 0
No one has voted for it yet.