Unable to un-Permanent dhcp after changes made to Address Reservation in Archer AX6000

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to un-Permanent dhcp after changes made to Address Reservation in Archer AX6000

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to un-Permanent dhcp after changes made to Address Reservation in Archer AX6000
Unable to un-Permanent dhcp after changes made to Address Reservation in Archer AX6000
2022-01-09 12:27:47 - last edited 2022-01-09 14:50:06
Model: Archer AX6000  
Hardware Version: V2
Firmware Version: 1.0.3 Build 20210719 rel.18941(4555)

DHCP Client List

View the devices that are currently assigned with IP addresses by the DHCP server.

Device Name   MAC Address          Assigned IP Address Lease Time

Name               

A                              

192.168.0.X                

Permanent   

 

 

Address Reservation

Reserve IP addresses for specific devices connected to the router.

  Device Name MAC Address Reserved IP Address Status Modify
 

Name             

A                     

192.168.0.Y                

                        

 

 

This is basically a copy-paste from my DHCP Server section of my Archer AX6000 that best describes my problem.

I can't make the device switch to address Y because its stuck being "Permanent" on address X.

 

How do I fix this and release the Permanent state without factory resetting my router?

  1      
  1      
#1
Options
1 Accepted Solution
Re:Unable to un-Permanent dhcp after changes made to Address Reservation in Archer AX6000-Solution
2022-01-09 12:40:52 - last edited 2022-01-09 14:50:06

@AmazingMiki 

 

If you have set IP & MAC Binding for this device just delete the binding entry and reboot the router:

 

 

After the reboot check if everything's OK.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Unable to un-Permanent dhcp after changes made to Address Reservation in Archer AX6000-Solution
2022-01-09 12:40:52 - last edited 2022-01-09 14:50:06

@AmazingMiki 

 

If you have set IP & MAC Binding for this device just delete the binding entry and reboot the router:

 

 

After the reboot check if everything's OK.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:Unable to un-Permanent dhcp after changes made to Address Reservation in Archer AX6000
2022-01-09 14:29:53 - last edited 2022-01-09 14:30:03

It kind of worked for a few devices! but not for all of them from some reason

  0  
  0  
#3
Options