Home Network Community > Deco > Deco X60 - How to port forward to a listening-only device?
< Deco

Deco X60 - How to port forward to a listening-only device?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco X60 - How to port forward to a listening-only device?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco X60 - How to port forward to a listening-only device?
Deco X60 - How to port forward to a listening-only device?
2022-02-08 17:03:29 - last edited 2022-02-09 15:28:35

I've searched around and can't get anywhere with this problem --

 

I've got a local device that listens (only) for incoming connections.  Since it never appears on the device list in the Deco app, I can't set up port forwarding to it.

 

I thought I'd work-around that by setting up an address reservation first.  Incredibly, I can't assign an IP address to a MAC address, even though I have both pieces of information in my hand! 

 

What kind of UI is that??

 

Does anyone know of a way to plug in the values?

 

Thanks,

Steve

 

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Deco X60 - How to port forward to a listening-only device?-Solution
2022-02-09 04:43:06 - last edited 2022-02-09 15:28:35

@stevetnj 

 

Check if this solution will workaround your issue.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  3  
  3  
#2
Options
Re:Deco X60 - How to port forward to a listening-only device?-Solution
2022-02-09 15:28:18 - last edited 2022-02-09 15:28:47

@terziyski 

 

Thanks for the suggestion!  I modified it a bit and got things working.  Here's what I did:

 

1. Unplugged the device that will be getting the forwarded traffic. It was already assigned a static IP.

2. Changed one of my PCs to use that same static IP, then waited until the address change appeared in the Deco app.

3. Using the app, added the port forwarding entry to the PC that was modified.

4. Changed the PCs address back to what it used to be.

5. Plugged in the "real" device that is the target of the forwarded traffic.

 

Thanks again,

Steve

 

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:Deco X60 - How to port forward to a listening-only device?-Solution
2022-02-09 04:43:06 - last edited 2022-02-09 15:28:35

@stevetnj 

 

Check if this solution will workaround your issue.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  3  
  3  
#2
Options
Re:Deco X60 - How to port forward to a listening-only device?-Solution
2022-02-09 15:28:18 - last edited 2022-02-09 15:28:47

@terziyski 

 

Thanks for the suggestion!  I modified it a bit and got things working.  Here's what I did:

 

1. Unplugged the device that will be getting the forwarded traffic. It was already assigned a static IP.

2. Changed one of my PCs to use that same static IP, then waited until the address change appeared in the Deco app.

3. Using the app, added the port forwarding entry to the PC that was modified.

4. Changed the PCs address back to what it used to be.

5. Plugged in the "real" device that is the target of the forwarded traffic.

 

Thanks again,

Steve

 

Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 374

Replies: 2

Related Articles
How to block a specfic port on Deco M4 ?
2895 1
How to configure a Trunk Port
299 1
Lan to Wan port forward
568 0
Unable to Port forward 44158
1053 0
How to get beta X60 firmware to fix port forwarding?
760 0
Port forward
271 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.