SSID Isolation don't work
I have setted the Wifi Network with SSID Isolation for a Guest Access but It's don't work. I see other devices in the net.
I've Upgraded the Firmware to the last Verion but the isolation don't work.
Is it a Bug?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
how do you get the result that you can see other devices? using IP scanner kinda of tool?
that isolation is supposed to block the guest from ping-ing or accessing the LAN
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
SSID Isolation is just that, it isolates the particular SSID from the other SSIDs. It is not client isolation. It's really meant to be used with VLANs.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
SSID Isolation only prevents clients connected to that AP on the same SSID from talking to each other, it does NOT prevent clients from talking to devices reached via the APs Ethernet ports, or even other SSIDs using the same VLAN on that same AP.
See https://www.tp-link.com/us/support/faq/1060/
"4. If you want to Block the communication between wireless clients which connected with same SSID of same AP, please enable SSID Isolation function (block the communication between wireless clients which are connected to a same SSID of a same AP) at Wireless Settings->Basic Wireless Setting->Edit SSID"
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1892
Replies: 9
Voters 0
No one has voted for it yet.