4 units of Archer AX 1500 into a daisy chain

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

4 units of Archer AX 1500 into a daisy chain

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
4 units of Archer AX 1500 into a daisy chain
4 units of Archer AX 1500 into a daisy chain
2022-03-30 09:55:23 - last edited 2022-03-31 03:35:43
Model: Archer AX1500  
Hardware Version: V1
Firmware Version: updated to the latest as of 30March 2022

I would like your assistance to daisy chain 4 units of Archer AX 10 from my modem. The distances from each unit is about 30 meters (2 units are on the 5/F floor, and another 2 units are on the 6/F)

1) Should the first AX10 connected via cat6 from my modem have a cat6 inserted into the WAN Port (of this 1st AX 10 unit named ALPHA. For purposes of this query, I will name the 4 AX 10 units as ALPHA, BRAVO, CHARLIE, DELTA).

2) Then should I insert from one of the LAN ports of the ALPHA,  a cat6 cable and insert it into the WAN port of BRAVO.

3) Then should I insert from one of the LAN ports of the BRAVO,  a cat6 cable and insert it into the WAN port of CHARLIE.

4) And should I insert from one of the LAN ports of the CHARLIE,  a cat6 cable and insert it into the WAN port of DELTA.

5) And my final question is should I also configure the 4 AX 10 units into AP modes?

 


Your guidance is very much appreciated. 

 

Thank you,

BldgAdm

  0      
  0      
#1
Options
1 Accepted Solution
Re:4 units of Archer AX 1500 into a daisy chain-Solution
2022-03-30 17:52:04 - last edited 2022-03-31 03:35:43

BldgAdm wrote

I would like your assistance to daisy chain 4 units of Archer AX 10 from my modem. The distances from each unit is about 30 meters (2 units are on the 5/F floor, and another 2 units are on the 6/F)

1) Should the first AX10 connected via cat6 from my modem have a cat6 inserted into the WAN Port (of this 1st AX 10 unit named ALPHA. For purposes of this query, I will name the 4 AX 10 units as ALPHA, BRAVO, CHARLIE, DELTA).

2) Then should I insert from one of the LAN ports of the ALPHA,  a cat6 cable and insert it into the WAN port of BRAVO.

3) Then should I insert from one of the LAN ports of the BRAVO,  a cat6 cable and insert it into the WAN port of CHARLIE.

4) And should I insert from one of the LAN ports of the CHARLIE,  a cat6 cable and insert it into the WAN port of DELTA.

5) And my final question is should I also configure the 4 AX 10 units into AP modes?

 


Your guidance is very much appreciated. 

 

Thank you,

BldgAdm

  @BldgAdm 

 

1) Yes

2) Yes

3) Yes

4) Yes

5) Yes given your modem is doing NAT already (i.e. modem/router). If it's just a pure modem then only the ALPHA should be in wireless router mode.

Here's the AP mode gude - use Case 1.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  3  
  3  
#2
Options
2 Reply
Re:4 units of Archer AX 1500 into a daisy chain-Solution
2022-03-30 17:52:04 - last edited 2022-03-31 03:35:43

BldgAdm wrote

I would like your assistance to daisy chain 4 units of Archer AX 10 from my modem. The distances from each unit is about 30 meters (2 units are on the 5/F floor, and another 2 units are on the 6/F)

1) Should the first AX10 connected via cat6 from my modem have a cat6 inserted into the WAN Port (of this 1st AX 10 unit named ALPHA. For purposes of this query, I will name the 4 AX 10 units as ALPHA, BRAVO, CHARLIE, DELTA).

2) Then should I insert from one of the LAN ports of the ALPHA,  a cat6 cable and insert it into the WAN port of BRAVO.

3) Then should I insert from one of the LAN ports of the BRAVO,  a cat6 cable and insert it into the WAN port of CHARLIE.

4) And should I insert from one of the LAN ports of the CHARLIE,  a cat6 cable and insert it into the WAN port of DELTA.

5) And my final question is should I also configure the 4 AX 10 units into AP modes?

 


Your guidance is very much appreciated. 

 

Thank you,

BldgAdm

  @BldgAdm 

 

1) Yes

2) Yes

3) Yes

4) Yes

5) Yes given your modem is doing NAT already (i.e. modem/router). If it's just a pure modem then only the ALPHA should be in wireless router mode.

Here's the AP mode gude - use Case 1.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  3  
  3  
#2
Options
Re:4 units of Archer AX 1500 into a daisy chain
2022-03-31 02:03:44

  @terziyski Thank you very much for your prompt reply to my query!!!! I carried out your instructions and the system works very well!!!

  3  
  3  
#3
Options