@new2this 

 

Hey

 

Hopefully I am understanding you correctly.  You have a 160mbps down internet when you are cabled in, yet only around 20mbps when using the WiFi?   Is this correct

 

If so can you give us more info on your setup, what devices you have and how you tested this?   Are you connected to 2.4ghz or 5ghz and on what device..

 

Hopefully we can help!

 

  @Philbert I have starlink as my internet provider and my setup is the omada controller, the R605 v1, the SG2008 and an access point the EAP620

I've run speed test directvly in the omada homepade and im getting the speeds of 160 and when im on wifi im only getting 20ish mbps

If it is possible try to test internet speed from different device and through ethernet.

@new2this,

 

Network performance is affected by both endpoints, i.e. the AP and the client that you use to test.

They'll end up using the best BOTH of them can handle.

 

With Wi-Fi, it's a bit more complicated because there are more factors coming into play (distance, obstruction...).

Your EAP620 is probably not the bottleneck.

 

What kind of client are you using to test?

20Mbps is a practical speed for 802.11a or g endpoint...

 

With my phone over Wi-Fi, I'm practically getting about a third of my wired speed (when the bottleneck is the ISP), even less the further I move away from the AP.

The phone is the bottleneck (despite support for 802.11ac).

With a laptop over Wi-Fi, I'm back to being throttled by the ISP (although I'm getting close to practical limits of that standard).