Will this design support fast roaming?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I intend to deploy this exact configuration:
https://www.tp-link.com/us/support/faq/2949/
The only difference would be the EAP-225 outdoor, which would be wired, as the house siding is aluminum and I want to avoid degrading signal/bandwidth.
I could also wire the other indoors EAP as wiring is already there. (Mesh would essentially be disabled)
I would be using the software based Omada as I already have a server running 24/7 (vs the OC200, unless it is mandatory or strongly recommended)
Simply want to confirm if single SSID / Fast-handoff will work (via Omada or any other approach)
In other words, if my Samsung S10 is connected to the EAP245 indoors and I have to go outdoors, I want to make sure it dynamically switches to the EAP-225-outdoors.
Not the usual way where the EAP245 signal would have to fall to zero or near zero before it switches AP's.
Open to any feedback or suggestions,
Thank you!
