Archer C6 issue with home network - no internet via ethernet

Archer C6 issue with home network - no internet via ethernet

Archer C6 issue with home network - no internet via ethernet
Archer C6 issue with home network - no internet via ethernet
2022-07-12 08:23:44
Model: Archer C6  
Hardware Version: V3
Firmware Version: 1.0.14

I've just received and installed the TP-Link AC1200 - Archer C6 to my network, and it seems only 1 wired device will connect to the internet.

In terms of set up;

Originally I had FTTC with BT Broadband and now currently I have FTTP with Jurassic Fibre using their Nokia router. Due to them not allowing access to the router and WIFI issues I decided to install my own WIFI router. I've had their Nokia router put in bridge mode to install the Archer C6.

I’ve setup home networking with ethernet ports all over the house returning to my server cabinet and running off a Netgear JGS524 switch. It seems with the Archer only 1 device running off the switch is connecting to the internet, nothing else is working. The home network is still working as I can access servers and systems.

 

I’ve set up the WIFI and that seems to be okay.

  0      
  0      
#1
Options
1 Reply
Re:Archer C6 issue with home network - no internet via ethernet
2022-07-12 16:09:36 - last edited 2022-07-12 17:11:24

  @lordspunky 

 

Is your network topology like this:

Nokia router =>Archer C6=> Netgear JGS524

(bridge mode)   (PPPoE I guess)

If it is, this should work fine for all your ethernet ports.

This has been discussed in BT community:

https://community.bt<dot>com/t5/BT-Fibre-broadband/Nokia-FTTP-ONT-with-3rd-party-router/td-p/2179300

If this was helpful click on an arrow pointing upward. If this solves your issue, click the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options