MESH EAP225 to EAP620 is not workiing UPLINKS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MESH EAP225 to EAP620 is not workiing UPLINKS

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

NiroVi

2022-08-08 08:33:58

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-08-08

MESH EAP225 to EAP620 is not workiing UPLINKS

2022-08-08 08:33:58

Model: EAP620 HD

Hardware Version: V2

Firmware Version: 1.0.3_[20220325-rel58174]

Scanning uplinks from 192.168.1.46 The only device available is the other EAP225 192.168.1.47 far awy from the device and not the EAP620

1 Reply

Philbert

LV5

2022-08-08 21:48:16

Posts: 2607

Helpful: 1541

Solutions: 273

Stories: 0

Registered: 2020-11-08

Re:MESH EAP225 to EAP620 is not workiing UPLINKS

2022-08-08 21:48:16

@NiroVi

Looking at your screenshot, the third AP (6c-5a) is the ROOT and the first AP (1c-61) is its mesh client, this is indicated by the wifi type symbol after the CONNECTED.

Looking at the second AP (60-a4), it has a status of connected and no wifi symbol. This indicates it has a LAN connection to the controller and therefore is not connected via MESH.

This appears to be working perfectly. Its always better to have the APs connected via LAN, its much faster than MESH.

Mesh simply means that an AP is connected to another AP via wireless and NOT via a cable connection. Is it perhaps Roaming you are worried about? These are different things. What are you trying to achieve?

MESH EAP225 to EAP620 is not workiing UPLINKS

MESH EAP225 to EAP620 is not workiing UPLINKS

Information

Voters 0

Tags