Deco change IP lan

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco change IP lan

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco change IP lan
Deco change IP lan
2023-01-02 17:39:16 - last edited 2023-01-03 06:21:21
Model: Deco X50  
Hardware Version:
Firmware Version:

Hello

 

We've installed the deco system in our house. We can't change lan ip from 192.168.68.1 to 192.168.0.1. We have a error message : address ip lan and ip wan cannot have same sub-network mask. 

 

Can you help us doing that

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco change IP lan-Solution
2023-01-02 19:45:13 - last edited 2023-01-03 06:21:21

  @Christian59 

 

It means you have router that runs with IP range 192.168.0.*. You connected Deco mesh to that router. You want your home network keep running with IP range 192.168.0.*

 

The easiest way to achieve this is to switch Deco mesh to Access Point mode: How to set up Deco to work in Access Point mode

In that mode, your router will keep managing IP addresses of your home network and everything will stay on IP range 192.168.0.*

Recommended Solution
  2  
  2  
#2
Options
1 Reply
Re:Deco change IP lan-Solution
2023-01-02 19:45:13 - last edited 2023-01-03 06:21:21

  @Christian59 

 

It means you have router that runs with IP range 192.168.0.*. You connected Deco mesh to that router. You want your home network keep running with IP range 192.168.0.*

 

The easiest way to achieve this is to switch Deco mesh to Access Point mode: How to set up Deco to work in Access Point mode

In that mode, your router will keep managing IP addresses of your home network and everything will stay on IP range 192.168.0.*

Recommended Solution
  2  
  2  
#2
Options