Home Network Community > Access Points > TL-WA1201 Supported 5GHz channels
< Access Points

TL-WA1201 Supported 5GHz channels

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WA1201 Supported 5GHz channels

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA1201 Supported 5GHz channels
TL-WA1201 Supported 5GHz channels
2023-01-18 15:06:41 - last edited 2023-01-18 15:07:52
Model: TL-WA1201  
Hardware Version: V3
Firmware Version: Firmware Version: 1.10.32 Build 221020 Rel.61052n(4555)

Hi All,

 

I'm running a newly installed TL-WA1201 ( 1.10.32 Build 221020 ), and I'm struggling to tune the 5GHz operating channel so that it does not overlap with other neighbouring wifi networks. The web interface allows me only to select a channel between 36 and 48 (yes, I tried to scroll, but there are no other entries in the drop-down menu  ). Can someone advise if this AP supports higher channels at all? I checked the documentation, but it doesn't seem to have such info.

 

Thanks!

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:TL-WA1201 Supported 5GHz channels
2023-01-18 22:14:00

  @DNLS 

 

TL-WA1201 doesn't support DFS channels - that's the reason for having only 36-48 channel range.

For optimal performance:

If you've set channel width to 40Mhz then choose between channels 36 and 44.

If you've set channel width to 80Mhz then use only channel 36.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:TL-WA1201 Supported 5GHz channels
2023-01-20 15:07:54

  @terziyski Thanks for the reply. Sadly, this is not stated in the device specs, and I only found it after I bought it.

  3  
  3  
#3
Options

Information

Helpful: 0

Views: 670

Replies: 2

About Us
Press
Copyright © TP-Link Corporation Limited. All rights reserved.