Mifi TPLINK 7000

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Mifi TPLINK 7000

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Mifi TPLINK 7000
Mifi TPLINK 7000
2023-02-01 10:39:21
Model: M7200  
Hardware Version:
Firmware Version: 2.0

So I have a M7200 and when I brought it to a technician, he factory reset the mifi. 
 

I don't have the SSID or the password to get back into the mifi. 
 

is there another way to get back into the mifi after a factory reset if you don't have the SSID or password that was on the puck?

 

 

  0      
  0      
#1
Options
1 Reply
Re:Mifi TPLINK 7000
2023-02-02 11:49:55

  @KingmanC12 

 

Hi, the default SSID is usually TP-Link_xxxx, and the default wireless password is the last 8 digits of the IMEI, so please take out the battery, you will see another label inside, please look for the IMEI and write down the last 8 digits, then insert the battery and turn on the MiFi device, look for the WiFi SSID TP-Link_xxxx and try to connect using the last 8 digits of the IMEI.

 

By the way, please confirm if your MiFi device is M7000 or M7200, and what is the hardware version? like V1 or V2 etc.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options