Invalid LAN IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Invalid LAN IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Invalid LAN IP
Invalid LAN IP
2023-02-04 09:08:41 - last edited 2023-02-04 13:03:10
Model: Deco M4  
Hardware Version:
Firmware Version: 1.0.6

Hi All

 

Just got a new Deco M4 and want to change the LAN IP from 192.168.68.1 but no cannot change the first two 3 digit numbers of the network ID (192.168)

 

Can someone help me to see what I am missing here?

 

I already have an extensive network setup with static address that require the LAN IP to be changed I don't want to change every device

 

Any help greatly appreciated

 

Thanks

  0      
  0      
#1
Options
1 Accepted Solution
Re:Invalid LAN IP-Solution
2023-02-04 12:46:20 - last edited 2023-02-04 13:03:10

  @Suziebum 

 

This question was asked before. See the following forum topic: https://community.tp-link.com/en/home/forum/topic/503114

Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Invalid LAN IP-Solution
2023-02-04 12:46:20 - last edited 2023-02-04 13:03:10

  @Suziebum 

 

This question was asked before. See the following forum topic: https://community.tp-link.com/en/home/forum/topic/503114

Recommended Solution
  0  
  0  
#2
Options
Re:Invalid LAN IP
2023-02-04 13:02:49

  @Alexandre. 

 

Thank you!

 

I was searching all afternoon and didn't see this post

 

Thanks for your help that answers it

  0  
  0  
#3
Options
Re:Invalid LAN IP
2023-02-04 13:54:42

  @Suziebum 

 

There is one more thing: Deco does not play well with devices that have static IP address configured on them. If you plan to keep Deco mesh, consider changing that to IP addresses reserved in Deco. This may be an undertaking if you have many such devices, but it is one time activity. Also, next time you switch to different mesh or router, all you need to do is re-enter these settings in new router.

 

Here is the process for Deco mesh: How to configure Address Reservation with Deco

  0  
  0  
#4
Options