ER605 EAP660HD TL-SG2008 Omada Software Controller - Max Clients - Bottleneck

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 EAP660HD TL-SG2008 Omada Software Controller - Max Clients - Bottleneck

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 EAP660HD TL-SG2008 Omada Software Controller - Max Clients - Bottleneck
ER605 EAP660HD TL-SG2008 Omada Software Controller - Max Clients - Bottleneck
2023-02-20 16:57:23
Hardware Version: V1
Firmware Version:

I have the following TP-Link hardware:

- Omada Software Controller (on an Ubuntu linux box with a core-i5 and 12GB RAM)

- 1 x TL-SG2008P switch

- 4 x EAP 660HD Access Points

- 1 x ER605 Router

 

I found the EAP 660HD AP's can safely support between 250-350 clients.

 

I don't see similar 'recommended' max clients numbers for the router, switch and Omada software controller.

Where would I most likely experience the highest probability of a bottleneck?

  0      
  0      
#1
Options
1 Reply
Re:ER605 EAP660HD TL-SG2008 Omada Software Controller - Max Clients - Bottleneck
2023-02-20 22:47:39

  @kisong 

 

Hey

 

The controller wont be any cause of bottleneck as it can literally handle 100APs, 10 WAN connections etc.. you are WELL within the limits here

 

THe ER605, this will depend on your WAN link, if its greater than 1gbps this will be a bottleneck and you should look at the newer multigig version (sorry cant remember the model), otherwise you are likely OK here

 

The switch, that would be my concern!   The EAP660s have 2.5gb ports and if you are running 200+ clients that will saturate that 1gbps switch ports.   You really should be using multigig ports with 4x 660s.. 

  1  
  1  
#2
Options