TL-WR940N doesn't connect but WAN cable is working ( orange LED )

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WR940N doesn't connect but WAN cable is working ( orange LED )

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR940N doesn't connect but WAN cable is working ( orange LED )
TL-WR940N doesn't connect but WAN cable is working ( orange LED )
2023-02-23 19:12:39
Model: TL-WR940N  
Hardware Version: V6
Firmware Version:

I had a problem on my router and here is a solution to pass over this problem. 

 

The problem : 

The wi-fi on my router worked but it wasn't connect to internet ( orange led instead of blue one ). I tried to plug the WAN cable directly to my computer to check if it was working : it was. So the problem came from the router. 

 

The solution :

Change the MTU parameters via the http://192.168.0.1/  Network -> WAN -> MTU Size. I changed it to 1430 and it was working again.

 

Hope I helped you : )

  0      
  0      
#1
Options