Cannot connect RE200 to router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot get RE200 to connect to router
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, for your case, here are some suggestions.
1. Please check whether Wireless password of your router you entered is correct or not? Please go to Settings--WiFi on your phone to forget the new router WiFi, then reconnect it using the same Wi-Fi password to see if it works.
2. Please reset the extender into default settings again by holding the reset button until all lights flashing once, then refer to this instruction to configure your range extender again carefully:
Via Tether App: https://www.tp-link.com/support/faq/1373/
Via Web interface: https://www.tp-link.com/support/faq/1400/
Note: During the configuration, please make sure that the extender is close to your router and be careful when you enter router's wireless password.
If it still doesn't connect, please check if there are any special settings on your main router, like access control etc. which will block the extender.
If no such special settings, please let us know the following information:
1) the LED status of your range extender
2) distance between range extender and your router
3) model number and hardware version of your main router
- Copy Link
- Report Inappropriate Content
Hi, for your case, here are some suggestions.
1. Please check whether Wireless password of your router you entered is correct or not? Please go to Settings--WiFi on your phone to forget the new router WiFi, then reconnect it using the same Wi-Fi password to see if it works.
2. Please reset the extender into default settings again by holding the reset button until all lights flashing once, then refer to this instruction to configure your range extender again carefully:
Via Tether App: https://www.tp-link.com/support/faq/1373/
Via Web interface: https://www.tp-link.com/support/faq/1400/
Note: During the configuration, please make sure that the extender is close to your router and be careful when you enter router's wireless password.
If it still doesn't connect, please check if there are any special settings on your main router, like access control etc. which will block the extender.
If no such special settings, please let us know the following information:
1) the LED status of your range extender
2) distance between range extender and your router
3) model number and hardware version of your main router
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 730
Replies: 2
Voters 0
No one has voted for it yet.