oc200 and er605 ip masquerading / 1to1 nat
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
hi all,
i need to apply a network configuration but seems like the current firmware of my devices is not ready for it!
my network have some VLAN, i need to masquerade an ip of a VLAN (eg 192.168.11.180 vlan client) to another ip in a different vlan (eg 192.168.10.180 vlan server)
practically i have a device in the client VLAN (192.168.11.180) that need to be seen on the same VLAN of the server. i know that this can be done with outbound nat or ip masquerading, but seems that this feature in still not deployed on oc200 and er605, it's right?
this is what i woult obtain:
Masquerading
If you've multiple VLAN's/subnets and you're in control over the router in between, then I'd setup masquerading for the outgoing routing interface of the VLAN/subnet where the Xiaomi devices reside. This basically means changing the source address in the UDP packet headers to the IP address of routing interface. If you want to know more about this, just inform yourself about packet masquerading and/or SNAT.
