Can't erase provider data
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My provider data has changed, and I need to update PPoE user and password.
I've updated it, reset it, factory reset it several times, and while it looks OK on the router it doesn't connect to the new provider and keeps connecting to the old details (according to the internet provider tracking)
They don't have the option to reset the router obviously, and no matter what I do it keeps connect to the old provider, how can I force delete it???
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If your router has been provided by your old ISP (i.e with customized FW) that could be the reason for this behavior.
If it's not, resetting the router to its factory defaults should wipe out any previously configured settings.
- Copy Link
- Report Inappropriate Content
Thanks for your answer!
The router wasn't provided, I bought it privately from a store.
I'm writing this post since I have done factory reset, but it's NOT removing the old data and the company can't connect me due to that.
Any other way to force the router to not being able to connect to the "old" data?
- Copy Link
- Report Inappropriate Content
You can either reset the router to its factory defaults or change the related settings according your new ISP, then save them.
How to reset the AX1800 - "Press and hold the reset button for about 6 seconds until the Power LED blinks to reset the router to its factory default settings."
- Copy Link
- Report Inappropriate Content
Tried both.
I've saved the new details, but it's still connecting to the old ones (according to the the internet provider)
I've factory reset it several times with the new details and it's still connecting to the old data somehow.
That's why I'm looking for a different solution
- Copy Link
- Report Inappropriate Content
Hi, may I know who your current ISP is? and except for the PPPoE username and password, does the ISP also require to configure VLAN ID to connect the internet?
Besides, the Archer AX1800 router is connected to your ISP modem, or connect to an Ethernet port on the wall?
Anyway, please bypass the AX1800 router, connect a computer to the ISP modem/Ethernet port on the wall with the same cable, then check if the computer could get internet access from it directly. Since your ISP requires PPPoE username and password, you could refer to this guide to configure PPPoE on your computer:
How to set up a PPPoE connection on Windows 8&10
How to configure PPPoE connection on Mac pro
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 461
Replies: 5
Voters 0
No one has voted for it yet.