Home Network Community > Wi-Fi Routers > Help! My Archer C20's Wired Speeds are Capped at 10mbps After Power Outages
< Wi-Fi Routers

Help! My Archer C20's Wired Speeds are Capped at 10mbps After Power Outages

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Help! My Archer C20's Wired Speeds are Capped at 10mbps After Power Outages

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Help! My Archer C20's Wired Speeds are Capped at 10mbps After Power Outages
Help! My Archer C20's Wired Speeds are Capped at 10mbps After Power Outages
2024-02-01 02:43:45
Model: Archer C20  
Hardware Version:
Firmware Version:

Hey there,

So, I moved to the Archer C20 router yesterday, and things were going nice, until the power went out. Now, whenever that happens, my ethernet speed is being capped at 10mbps. Also restarting the computer makes the same problem!
a speed

The only fix? Unplugging and replugging the ethernet cable like two or three times, and configuring the adapter. After doing this manually, things become okay
 

another speed

This wasn't a thing with my old router, and wireless seems fine, so it's gotta be something with the C20. Any ideas on what might be causing this trouble? I've checked the usual suspects (cable quality, settings, firmware, changing ports), but no dice.

Thanks for any tips!

  0      
 
  0      
 
#1
Options
3 Reply
Re:Help! My Archer C20's Wired Speeds are Capped at 10mbps After Power Outages
2024-02-01 05:09:13

  @Hulo-Mao-23 

 

Use another ethernet cable of a good quality and test if the issue has gone.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Help! My Archer C20's Wired Speeds are Capped at 10mbps After Power Outages
2024-02-03 14:21:04
nope, it didn't solve. Any other way?
  0  
  0  
#3
Options
Re:Help! My Archer C20's Wired Speeds are Capped at 10mbps After Power Outages
2024-02-03 16:54:13

  @Hulo-Mao-23 

 

You didn't mention your C20 HW and FW version. Make sure that you're with the latest for your device.

Only LAN1 has this issue or all LAN ports ?

The other reason for such issue can be a defective ethernet port, which is highly unlikely for a brand new device.

If nothing helps you can contact your local tech support for assistance on that.

 

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 916

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.