Deco M9 Plus limitations

Deco M9 Plus limitations

Deco M9 Plus limitations
Deco M9 Plus limitations
2024-02-02 18:24:09 - last edited 2024-02-04 07:10:17
Model: Deco M9 Plus  
Hardware Version:
Firmware Version: 1.6.2 Build 20230906 Rel. 78043

Hi guys,

Need your help to understand something with my connections at home.

 

My archicture is like the following (all connections made using ethernet Cat6 cables);

 

1. Fiber Signal (1GB) -> Main Router -> Deco M9 Plus -> TpLink Hub -> House Hub

2. Living Room (from House Hub) -> TpLink Hub -> Apple TV (and other equipments)

 

With the architecure above, executing Speedtest app in AppleTV the download speed is something around 480Mg... strange for because is everything is connect using Cat6 ethernet cables...

 

To test if the problem was the signal from the supplier, I changed my home connection avoiding the Deco, basically:

 

1. Fiber Signal (1GB) -> Main Router -> House Hub

2. Living Room (from House Hub) -> TpLink Hub -> Apple TV (and other equipments)

 

Executing Speedtest app in AppleTV without Deco M9 Plus the download speed is something around 920Mg

 

is there any limitation in Deco M5?

 

Thanks in advance

Luis

  0      
  0      
#1
Options
1 Accepted Solution
Re:Deco M9 Plus limitations-Solution
2024-02-02 18:47:51 - last edited 2024-02-04 07:10:17

  @LuisVS solved!

 

Solution was on the Deco app on QoS adjustments option... Bandwith was limited to 500Mg download and 120Mb upload.

I've changed to 1000Mg / 500Mg and now I've closer results to the signal from the supplier... 930Mb download and 430 upload

Recommended Solution
  1  
  1  
#2
Options
2 Reply
Re:Deco M9 Plus limitations-Solution
2024-02-02 18:47:51 - last edited 2024-02-04 07:10:17

  @LuisVS solved!

 

Solution was on the Deco app on QoS adjustments option... Bandwith was limited to 500Mg download and 120Mb upload.

I've changed to 1000Mg / 500Mg and now I've closer results to the signal from the supplier... 930Mb download and 430 upload

Recommended Solution
  1  
  1  
#2
Options
Re:Deco M9 Plus limitations
2024-02-02 21:18:40

  @LuisVS 

 

 

Because you have router (Main Router), you can configure Deco mesh to run in Access Point mode: Switching a Deco to Access Point (AP) Mode

This will eliminate all Deco mesh bandwidth throttling.

 

Also, with Deco mesh running in Access Point mode, you will not need to pass wired traffic through Main Deco. You can have the following:

 

1. Fiber Signal (1GB) -> Main Router -> House Hub

2. Living Room (from House Hub) -> TpLink Hub -> Apple TV (and other equipments)

 

and connect Main Deco as a wired client to either Main Router or one of hubs free Ethernet port. 

 

 

 

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 393

Replies: 2

Related Articles