What is the purpose of the "WAN Unicast" configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

What is the purpose of the "WAN Unicast" configuration

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
What is the purpose of the "WAN Unicast" configuration
What is the purpose of the "WAN Unicast" configuration
2024-02-14 18:30:17
Model: Deco X60  
Hardware Version: V3
Firmware Version: 1.2.5

Hi,

 

What is the purpose of the "WAN Unicast" configuration under Advanced -> System -> System Parameters menu, when using a web browser?

 

I couldn't find documentation on it.

 

Thanks

  4      
  4      
#1
Options
1 Reply
Re:What is the purpose of the "WAN Unicast" configuration
2024-02-15 15:40:04 - last edited 2024-02-18 14:11:31

  @Andre_BR 

 

It's basically an option that can be used if you are having trouble getting a DHCP address from your ISP.  if you have it unchecked and are getting an address from your ISP you can leave it unchecked.  Checking or unchecking only effects the WAN connection to your ISP.

 

There are other vendors that use the same option:

Use Unicasting:  This option is normally turned off, and should remain off as long as the WAN-side DHCP server correctly provides an IP address to the router. However, if the router cannot obtain an IP address from the DHCP server, the DHCP server may be one that works better with unicast responses. In this case, turn the unicasting option on, and observe whether the router can obtain an IP address. In this mode, the router accepts unicast responses from the DHCP server instead of broadcast responses.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  38  
  38  
#2
Options