Change router password
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I've forgot my router password and the stored password in my browser is wrong.
So I can login via my ID (e-mail address) and password.
When I try to change the password under Advanced -> Administration -> Change password , I get the message, that the old password is not correct.
I know, but how I can change the password now without reset the router?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If you forgot your TP-Link ID (e-mail address) password this can be emailed to you using the "Forgot password" option.
But I don't believe you can change your forgotten local admin password without resetting the router to its factory defaults.
Here's a guide that explains how to recover your router password in case you forgot it.
- Copy Link
- Report Inappropriate Content
If you forgot your TP-Link ID (e-mail address) password this can be emailed to you using the "Forgot password" option.
But I don't believe you can change your forgotten local admin password without resetting the router to its factory defaults.
Here's a guide that explains how to recover your router password in case you forgot it.
- Copy Link
- Report Inappropriate Content
The login via TP-Lin ID is working. The problem from the guide is:
Note:
If you are using a TP-Link ID to log in to the web management page, the Password Recovery feature will be disabled. To manage the TP-Link ID, go to Basic > TP-Link Cloud.
So i have no option to reset the password as shown in the guide.
- Copy Link
- Report Inappropriate Content
That's correct. Password recovery should be configured when you remember your local admin password. You have to reset the device in order to change it.
- Copy Link
- Report Inappropriate Content
I don't spend the time to setup my network completely new.
Is it possible to make a backup of the settings without the actual password?
Then I can reset the router with a new password in copy the backup back. Otherwise I use the login via TP-Link ID.
- Copy Link
- Report Inappropriate Content
When doing a backup the local admin password would be backed up too. So your only option is to using the TP-Link ID login if you don't want to reset the device.
- Copy Link
- Report Inappropriate Content
Thanks for all. I will use the ID.
I can reset the router, when I make my network completely new to add a server structure here.
First I have to repair my internet connection. My cat played with the fiberglass wire. The speed is now like I use a 14.4k modem from the 90s.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 969
Replies: 6
Voters 0
No one has voted for it yet.