ARCHER C80 not working in AP Mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ARCHER C80 not working in AP Mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ARCHER C80 not working in AP Mode
ARCHER C80 not working in AP Mode
2024-02-22 03:55:29
Model: Archer C80  
Hardware Version: V1
Firmware Version: 1.13.2 Build 230824 Rel.74702n(5553)

Router works normal on "reset configuration".

Goes through the wizard with no problems.

 

When changing to AP Mode:

DHCP doesn't work on wired clients.

Wireless clients can connect but get disconnected almost instantly.

Router is inaccessible.

 

  0      
  0      
#1
Options
1 Reply
Re:ARCHER C80 not working in AP Mode
2024-02-22 05:47:56

  @MPDC 

 

Use this guide for configuring C80 in AP mode (Case 1). Set a static IP address so you can easily access the router WebGUI.

For example 192.168.0.254 if your main router is in 192.168.0.0./24 subnet.

In AP mode C80 DHCP server should be off so your devices can obtain its IP addresses from your main router.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options