cannot access devices on local network RE190 AC750

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

cannot access devices on local network RE190 AC750

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
cannot access devices on local network RE190 AC750
cannot access devices on local network RE190 AC750
2024-03-30 19:48:06 - last edited 2024-03-31 13:55:14

Hello,

 

I just bought 3 tp-link  RE190 AC750 repeaters and placed them around the home, all is fine except I cannot access some of the devices directly on my local network unless I am connected to the same repeater. Is there anyway to fix this?

 

 

And if I look on my router I can no longer see the devices, ie security cameras, tvs etc I just see RE190 and all show as offline but they are all give me internet access.

How can I get back into the RE190 AC750 configuration web page after it is setup so I can see which devices are connected through that particular repeater?

 

Thanks

 

Wifi devices as shown on router...

 

 

  1      
  1      
#1
Options
1 Accepted Solution
Re:cannot access devices on local network RE190 AC750-Solution
2024-03-30 22:20:39 - last edited 2024-03-31 13:55:14

  @PL259 

 

What's you main router make and model ?

If you set a static IP addresses on the three extenders you'll alway know them and login their web management.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:cannot access devices on local network RE190 AC750-Solution
2024-03-30 22:20:39 - last edited 2024-03-31 13:55:14

  @PL259 

 

What's you main router make and model ?

If you set a static IP addresses on the three extenders you'll alway know them and login their web management.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
Re:cannot access devices on local network RE190 AC750
2024-03-31 13:53:24

 

  @PL259 

Thanks for the info,

I configured the repeaters as you said with fixed IPs and now I can access them individually to see what devices are connected to them and also I can access any device on the local network.
My router is Huawei EchoLife EG8145V5, It still shows the repeaters as offline but it does work.

I noticed that the repeaters are connected to each other as the second and third repeaters are too far away to connect directly to the router.

All repeaters are using the same ssid which I suppose is ok although when I configured them the default option was to use _EXT for the ssid.

Thanks

.

 

  1  
  1  
#3
Options
Re:cannot access devices on local network RE190 AC750
2024-03-31 17:13:09

  @PL259 

 

Two notes on what you've described:

1. Regarding daisy chaining REs you can refer to this guide - Q3.6.

2. REs SSID could be the same or different. When using a different SSID for every RE you can tell at any time to which RE you're connected.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#4
Options
Re:cannot access devices on local network RE190 AC750
2024-03-31 18:16:04

  @PL259 Thanks :)

  0  
  0  
#5
Options