Home Network Community > Wi-Fi Routers > Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
< Wi-Fi Routers

Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
123

Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-03-31 13:20:14 - last edited 2024-04-03 07:14:50
Tags: #Wi-Fi 7 #Multi-Gigabit #Deco Mesh
Model: Archer BE800  
Hardware Version: V1
Firmware Version: Archer BE800(SG)_V1_1.0.12 Build 20231117

I have been running a home network seamlessly using the Archer AX75 as a router and Deco BE85 and other deco models for the mesh. The Archer is in router mode with wifi disabled and decos are in Access Point mode for great wifi coverage.

 

I am about to move from 1 Gb to 10Gb internet at home, so I bought an Archer BE800 router, which can manage 10Gb, in advance to replace my Archer AX75. It has been a disaster!

 

The Deco network keeps failing, and the internet keeps falling. I sometimes get speeds of 500Mbs; other times, I get 10Mbs. Worse, the Deco mesh keeps dropping signal.

To make sure it wasn't any other issue, I swapped it back to the AX75, and everything is working perfectly giving me wireless speeds of 700-900Mbs (I am still on the 1Gb service) depending on where I am at home.

 

I then swapped back to the BE800, and everything went crazy, and nothing worked well.

 

Anyone else having this issues? Any fixes?

 

Why will the Deco work well with the Archer AX75 and not the Archer BE800??

  0      
 
  0      
 
#1
Options
23 Reply
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-03-31 17:37:44

  @dis69 

 

What LAN port of BE800 you''re using to connect the main Deco and what's the model of your main Deco unit ?

This symptoms can be caused by the negotiated speed problems over the ethernet connection between BE800 and main Deco.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 00:34:00 - last edited 2024-04-01 00:47:43

 Dear @terziyski 

 

-Main Deco is a BE85

-Using port 3 (10Gb WAN) on the BE800

-Using port 1(10GB) on the BE85 main deco

[See images below]

 

How do I solve this issue? I am pulling my hair out.

 

Thank you in advance.

 

BE800

BE85 Caption

 

 

 

terziyski wrote

  @dis69 

 

What LAN port of BE800 you''re using to connect the main Deco and what's the model of your main Deco unit ?

This symptoms can be caused by the negotiated speed problems over the ethernet connection between BE800 and main Deco.

 

  0  
  0  
#3
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 02:55:56

  @dis69 

 

Can you check the negotiated speed here:

 

 

Scroll down at the bottom of that page and check:

 

Using cables from the BE800 kit and Deco BE85 kit would be the best option if your negotiated speeds are not correct - they should be CAT 6.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 05:46:04

  @terziyski 

 

Will check when I get home. Does it matter that I still do not have my 10Gbs line and am using it with the 1Gbs internet from the ISP?

 

Thank you.

  0  
  0  
#5
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 06:01:01

  @dis69 

 

Your ISP bandwidth doesn't matter in this case because the issue is within your LAN.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 06:05:54

  @terziyski 

 

Do I worry only about the cable between BE800 and main deco BE85 or do I need to check all cables to all other decos too? I have 5 decos (m5, m9, x75) with Ethernet backhaul too.

  0  
  0  
#7
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 06:28:11

  @dis69 

 

I think that checking only the cable between the BE800 and Deco would suffice because (from your description) everything works as it should when you use your Archer AX75.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#8
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 09:22:58

  @dis69 

 

Hi, please also make sure EasyMesh is disabled on the Archer BE800, and let us know if it helps.

If the problem still exists, please let us know if the issue happens with Deco network only, or if the main router BE800 internet drops as well and speed gets slow.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#9
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 10:58:36

  @terziyski 

 

It only scrolls dwon to MAC clone. Does not show me the ethernet status. My AX75 shows it to me and all on full duplex. On the BE800 it will not show it to me. See image below.

 

  0  
  0  
#10
Options
Re:Deco Mesh with Archer BE800 giving me headaches (Archer AX75 works like a dream)
2024-04-01 10:59:12

  @Sunshine 

 

I have disabled EasyMesh.

  0  
  0  
#11
Options
123

Information

Helpful: 0

Views: 2559

Replies: 23

Tags

Wi-Fi 7 Multi-Gigabit
Deco Mesh
Related Articles
BE800 to form Mesh with AX11000 and REX505
1041 0
 Archer BE800 webUI?
390 0
 Exploring the Power of Multi-Gigabit Ports with TP-Link Archer BE800
300 2
Would my Be800 in access point mode work with Deco 65 mesh
166 0
BE800 - 2.4g unstable
654 0
Archer BE800 - where is the advanced diagnostics/logs?
423 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.