Home Network Community > Wi-Fi Routers > Does Archer C6 Support more than 254 IP in DHCP Pool
< Wi-Fi Routers

Does Archer C6 Support more than 254 IP in DHCP Pool

Does Archer C6 Support more than 254 IP in DHCP Pool

Does Archer C6 Support more than 254 IP in DHCP Pool
Does Archer C6 Support more than 254 IP in DHCP Pool
2024-04-05 03:27:36 - last edited 2024-04-05 04:50:06
Tags: #DHCP
Model: Archer C6  
Hardware Version: V4
Firmware Version:

Hello everyone,

We have a network where we have one old TP-link router (TL-840N) as Internet gateway router with IP 192.168.0.1/24.

 

We have place total 21 Archer C6 router in network as access point for providing connectivity to our devices on WLAN only.

 

These local devices are more than 250. (not computer/mobiles, but some controller devices)

 

So my plan is to change main Internet router, we can put new Archer C6 router as Internet gateway router with IP configuration 192.168.0.1/255.255.254.0, so that we can have total 510 usable IP addresses (192.168.0.1 to 192.168.1.254).

 

Main concern is that DHCP pool!

Can I configure more than 254 IP addresses in the DHCP pool with the above LAN IP configuration?

 

 

Regards,

Sagar Patel

  0      
 
  0      
 
#1
Options
7 Reply
Re:Does Archer C6 Support more tham 254 IP in DHCP Pool
2024-04-05 04:23:37

  @sagar002100 

 

Archer C6 is a home wireless router and I doubt that it can handle such number of client devices.

I would recommend to get a business grade router for an internet gateway like one of these to play safe.

For sake of the experiment you could by one more Archer C6 and configure as the internet gateway.

If that doesn't work for you, get one of the business routers mentioned and you'll have one more Archer C6 as an AP.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Does Archer C6 Support more tham 254 IP in DHCP Pool
2024-04-05 04:49:29 - last edited 2024-04-05 04:49:50

  @terziyski 

Hello,

Our aim that our 250 devices should get IP addresses from the DHCP pool.

These 250 devices won't generate any Internet traffic. They all will send data to an application running on one computer in network.

 

We have 250 controller devices, 21 access point and 10 computers, so that we have to configure subnet of 512 IP addresses.

 

Regards,

Sagar Patel

  0  
  0  
#3
Options
Re:Does Archer C6 Support more tham 254 IP in DHCP Pool
2024-04-05 12:19:16 - last edited 2024-04-05 12:20:18

  @sagar002100 

 

I understand your point and I've seen a 23-bit netmask used in home routers LAN settings, but I'm not sure if that will work for you - I've never tested this:

 

 

Setting 23-bit netmask is allowed:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Does Archer C6 Support more tham 254 IP in DHCP Pool
2024-04-06 13:55:14

  @terziyski Namaste,

I tried this on Archer C6 version 4 router. 
 

I changed mask to 255.255.254.0

and configured DHCP pool from 192.168.0.2 to 192.168.1.200. 
 

I saved this and did not give an error.! 
 

 

Regards, 

Sagar Patel 

  0  
  0  
#5
Options
Re:Does Archer C6 Support more tham 254 IP in DHCP Pool
2024-04-06 16:17:39

  @sagar002100 

 

So far so good. Now you have to check whether the C6 can offer IP addresses from its 192.168.1.0/24 subent to your client devices.

In order to check that you can use the DHCP address reservation feature of C6 - details.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:Does Archer C6 Support more tham 254 IP in DHCP Pool
2024-04-08 04:32:03

  @terziyski 

I checked that in different way.

I joined one wireless device and assigned manual IP in the range of 192.168.1.X and other devices were joined ang recevied IP addresses from DHCP pool.

 

I checked communication between the devices on 192.168.0.X and 192.168.1.X.

Devices on the both the subnets were communicating.

 

Then, Should I check the DHCP reservation?

 

Regards,

Sagar Patel

 

 

  0  
  0  
#7
Options
Re:Does Archer C6 Support more tham 254 IP in DHCP Pool
2024-04-08 13:07:25

  @sagar002100 

 

I would test that as well, because with your test you just test connectivity, but not the C6 DHCP server. This should be a quick test - after all that's your decision.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#8
Options

Information

Helpful: 0

Views: 248

Replies: 7

Tags

DHCP
Related Articles
Extend dhcp max 254 ip range
203 0
Does router TP-Link Archer C6 supports POE?
4159 0
DHCP larger than 254 IP address
2324 0
Archer C6 DHCP request
1897 0
Archer MR600 does not allow more than 32 connected devices
428 0
Onemesh support archer c6 v2
654 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.