PCIe 2.5Gbe or 10Gbe to use with Synology 1821+

PCIe 2.5Gbe or 10Gbe to use with Synology 1821+

PCIe 2.5Gbe or 10Gbe to use with Synology 1821+
PCIe 2.5Gbe or 10Gbe to use with Synology 1821+
2 weeks ago - last edited a week ago

Hi all,

 

I am new here and would like to seek help.

I am using Synology DS 1821+ and would like to upgrade connection to be 2.5Gbe or 10Gbe.

Is there any TP-Link PCIe NIC I can use with the DS 1821+. Do I need any driver to install in 

DS 1821+ other than just plug in the card?

 

Thank you and regards,

JC2024

  0      
  0      
#1
Options
1 Accepted Solution
Re:PCIe 2.5Gbe or 10Gbe to use with Synology 1821+-Solution
2 weeks ago - last edited a week ago

  @JC2024 

 

AFAIK Synology has a certain certified network adapters which are recommended to work with their hardware.

Check the optional accessories in the Synology 1821+ spec section here (bottom of the page).

TP-LInk PCIe NIC would definatelly need a driver to be able to work with.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:PCIe 2.5Gbe or 10Gbe to use with Synology 1821+-Solution
2 weeks ago - last edited a week ago

  @JC2024 

 

AFAIK Synology has a certain certified network adapters which are recommended to work with their hardware.

Check the optional accessories in the Synology 1821+ spec section here (bottom of the page).

TP-LInk PCIe NIC would definatelly need a driver to be able to work with.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 85

Replies: 1

Related Articles