Home Network Community > Adapters > TLWN822N doesn't see my wifi
< Adapters

TLWN822N doesn't see my wifi

TLWN822N doesn't see my wifi

TLWN822N doesn't see my wifi
TLWN822N doesn't see my wifi
2024-06-06 07:56:13
Model: TL-WN822N  
Hardware Version: V6
Firmware Version:
  • new TL-WN822N rev 6
  • Windows 10 (currently using a TL-WN781ND)
  • Zyxel DX3301-T0 router

 

I just bought a TL-WN822N to try and improve the connectivity for my desktop pc - the internal TL-WN781ND is facing the wall, near a bad location and the signal is not the best. After just plugging in the adapter out of the box, it would recognize my wifi but Windows (10) bluescreened shortly after connecting to the network.

 

I thought it was a driver issue, so I went and installed the latest available from https://www.tp-link.com/it/support/download/tl-wn822n/ (TL-WN822N(EUUS)_V5_181022_Win.zip)

After installation, it refuses to find my wifi, even though it can find all the others in the neighborhood.

 

Going back to the older card, everything works.

 

Wifi is on channel 9, both 2.4 and 5Ghz have the same SSID

What could be the issue?

 

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:TLWN822N doesn't see my wifi
2024-06-07 10:38:40

  @Yabbadidu 

Hi,

 

Please refer to the following troubleshooting steps:

1. Try the public driver for TL-WN822N V6: WindowsDriver_1030.44.0408.2024

2. Change the wireless settings on the main router, like channel 1/6/11 for 2.4GHz, and channel 36/40/44/48 for 5GHz.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:TLWN822N doesn't see my wifi
2024-06-10 06:51:07 - last edited 2024-06-10 06:51:47

  @Sunshine 

 

Thanks, installing those drivers helped and the adapter is now seeing and connecting to my home wifi again. Only thing, every 30 or so minutes it somehow goes in "No internet" despite the connection still being up and having the signal indicator to the max - Turning wifi off and on in windows fixes the issue for another 30 minutes.

 

Could the channel settings improve this?

  0  
  0  
#3
Options
Re:TLWN822N doesn't see my wifi
2024-06-10 14:29:00
Try below suggestions Check whether you have installed the latest driver or not. Check for your router's Wi-Fi channel, it might be congested.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 281

Replies: 3

Related Articles
TL-WN822N chipset
8260 0
How to install Tl-WN822N v5 WiFi adaptor in Kali Linux
52407 0
TL-WN822N cannot find WiFi-network
292 0
TL-WN822N V3 does not have drivers for Big Sur available
2751 0
TP-Link TL-WN822N V6 not recognized on Win 8.1 64-bit
560 0
computer doesn't see the adapter
554 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.