Business Community > Routers > ER605 v2 with Festa no entry clients device in table
< Routers

ER605 v2 with Festa no entry clients device in table

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 v2 with Festa no entry clients device in table

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
ER605 v2 with Festa no entry clients device in table
ER605 v2 with Festa no entry clients device in table
2024-06-17 10:42:28 - last edited 2024-06-18 02:14:29

Dear @David-TP and Team

 

I just bought ER605 v2 and sync with TP-Link Festa, but it's have no any information such as "Client", "Most Active Clients". In fact, there are about 10+ connected devices both wired and wireless.

 

 

 

 

Ā  0 Ā  Ā  Ā 
Ā 
Ā  0 Ā  Ā  Ā 
Ā 
#1
Options
1 Accepted Solution
Re:ER605 v2 with Festa no entry clients device in table -Solution
2024-06-18 02:14:08 - last edited 2024-06-18 02:23:21

Hi @Auu 

First time reminder for posting the thread on the wrong page.


Please do not use Festa if your model is not listed in the Festa: https://www.tp-link.com/en/business-networking/all-soho-festa/

This will be moved to the Omada router page. If this happens again posting on the wrong page, your post will be deleted without further notification.

 

ER605 is a product from Omada solution and you should be using the Omada Controller to manage it.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ā˜›Download Beta Hereā˜š ā˜› ā˜… Configuration Guide ā˜… ā˜š ā˜› ā˜… Knowledge Base ā˜… ā˜š ā˜› ā˜… Troubleshooting ā˜… ā˜š ā— Be kind and nice. ā— Stay on the topic. ā— Post details. ā— Search first. ā— Please don't take it for granted. ā— No email confidentiality should be violated. ā— S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
Ā  1 Ā 
Ā  1 Ā 
#2
Options
3 Reply
Re:ER605 v2 with Festa no entry clients device in table -Solution
2024-06-18 02:14:08 - last edited 2024-06-18 02:23:21

Hi @Auu 

First time reminder for posting the thread on the wrong page.


Please do not use Festa if your model is not listed in the Festa: https://www.tp-link.com/en/business-networking/all-soho-festa/

This will be moved to the Omada router page. If this happens again posting on the wrong page, your post will be deleted without further notification.

 

ER605 is a product from Omada solution and you should be using the Omada Controller to manage it.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ā˜›Download Beta Hereā˜š ā˜› ā˜… Configuration Guide ā˜… ā˜š ā˜› ā˜… Knowledge Base ā˜… ā˜š ā˜› ā˜… Troubleshooting ā˜… ā˜š ā— Be kind and nice. ā— Stay on the topic. ā— Post details. ā— Search first. ā— Please don't take it for granted. ā— No email confidentiality should be violated. ā— S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
Ā  1 Ā 
Ā  1 Ā 
#2
Options
Re:ER605 v2 with Festa no entry clients device in table
2024-06-18 04:16:08 - last edited 2024-06-18 04:21:36

  @Clive_A Noted, Thank you

 

I know it should be using the Omada Controller to manage it,  but ER605 (TL-R605) V2 is complatible with Festa too.

And I think this is the problem I encountered when using it with Festa.

 

Ā  0 Ā 
Ā  0 Ā 
#3
Options
Re:ER605 v2 with Festa no entry clients device in table
2024-06-18 05:55:46

Hi @Auu 

Auu wrote

  @Clive_A Noted, Thank you

 

I know it should be using the Omada Controller to manage it,  but ER605 (TL-R605) V2 is complatible with Festa too.

And I think this is the problem I encountered when using it with Festa.

 

 

I recommend you send an email to the local support in Thailand. I checked your local site but it indeed showed this.

However, as for the global site and my knowledge, we have not been informed that the Festa could be compatible or controlled with Omada.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ā˜›Download Beta Hereā˜š ā˜› ā˜… Configuration Guide ā˜… ā˜š ā˜› ā˜… Knowledge Base ā˜… ā˜š ā˜› ā˜… Troubleshooting ā˜… ā˜š ā— Be kind and nice. ā— Stay on the topic. ā— Post details. ā— Search first. ā— Please don't take it for granted. ā— No email confidentiality should be violated. ā— S/N, MAC, and your true public IP should be mosaiced.
Ā  0 Ā 
Ā  0 Ā 
#4
Options

Information

Helpful: 0

Views: 458

Replies: 3

Related Articles
ER605 V2 wireguard
2555 0
ER605 v.2 L2TP bridge
669 0
Ā ER605 v2 - how to get list of connected clients
3489 0
Wired Clients Not Showing in Festa Controller
1205 0
Error de actualizacion ER605 V2
713 0
Scheduled reboot for ER605 v2
832 0
About Us
Press
Copyright Ā© TP-Link Systems Inc. All rights reserved.