Business Community > SOHO Switches > I don't know how to set the switch TL-SG108E
< SOHO Switches

I don't know how to set the switch TL-SG108E

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

I don't know how to set the switch TL-SG108E

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I don't know how to set the switch TL-SG108E
I don't know how to set the switch TL-SG108E
2024-07-15 19:12:19 - last edited 2024-07-16 02:41:27
Model: TL-SG108E  
Hardware Version: V6
Firmware Version: 1.0.0 Build 20230218 Rel.50633

I have pfSense with couple Vlans. I think the Firewall settings are good, for now everything is open.

 

TPLink settings:

On port 1 in switch I attached pfSense

On port 2 in switch I attached AP

On port 3 in switch I attached Unraid

On port 4 in switch I attached Home Vlans

On port 5 in switch I attached Media Vlans

 

When I am connected to Vlan1 which is the default I can access both TPLink and Unraid,
When I'm connected to another Vlan (20 or 30), I can't.

These are my settings. I must be wrong somewhere.

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:I don't know how to set the switch TL-SG108E-Solution
2024-07-16 02:41:13 - last edited 2024-07-16 02:42:41

Hi @neba 

Thanks for posting in our business forum.

You might find this KB helpful:

Common Questions About 802.1Q VLAN

 

802.1Q VLAN is not accessible to each VLAN.

 

Confirm if you are using the VLAN interface on your pfsense and your VLAN has been configured correctly.

How to Configure VLAN on TP-Link Switch

Recommended Solution
  2  
  2  
#2
Options
Re:I don't know how to set the switch TL-SG108E-Solution
2024-07-16 22:23:10 - last edited 2024-07-17 01:27:13
It was a problem in the Firewall rules.

Thx

Recommended Solution
  1  
  1  
#3
Options
2 Reply
Re:I don't know how to set the switch TL-SG108E-Solution
2024-07-16 02:41:13 - last edited 2024-07-16 02:42:41

Hi @neba 

Thanks for posting in our business forum.

You might find this KB helpful:

Common Questions About 802.1Q VLAN

 

802.1Q VLAN is not accessible to each VLAN.

 

Confirm if you are using the VLAN interface on your pfsense and your VLAN has been configured correctly.

How to Configure VLAN on TP-Link Switch

Recommended Solution
  2  
  2  
#2
Options
Re:I don't know how to set the switch TL-SG108E-Solution
2024-07-16 22:23:10 - last edited 2024-07-17 01:27:13
It was a problem in the Firewall rules.

Thx

Recommended Solution
  1  
  1  
#3
Options

Information

Helpful: 0

Views: 462

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.