Home Network Community > Wi-Fi Routers > Connecting to the 2.4G Network
< Wi-Fi Routers

Connecting to the 2.4G Network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connecting to the 2.4G Network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connecting to the 2.4G Network
Connecting to the 2.4G Network
2024-08-03 20:46:11 - last edited 2024-08-06 02:57:56
Model: Archer AX3000  
Hardware Version: V1
Firmware Version: :1.2.0 3.0.0 v6060.0 Build 230829 Rel.34106n

I have a door camera that will only connect to a 2.4G network. How do I isolate the 2.4G network on my AX3000 router? At the moment I can only see a single network SSID.

 

TIA

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Connecting to the 2.4G Network-Solution
2024-08-05 07:26:27 - last edited 2024-08-06 02:57:56

  @kiwiatheist 

 

Hi, thanks for posting question here.

Smart Connect may be enabled, so you can only see one SSID.

Here are two methods that you can disable Smart Connect and set different wireless settings for 2.4GHz and 5GHz wifi band.

1. Login the web management interface, go to Advanced > Wireless > Wireless Settings, you should be able to disable the Smart Connect there.

2. Open the Tether APP on your phone and login the Router, go to Tools > Wireless Settings to disable it.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Connecting to the 2.4G Network-Solution
2024-08-05 07:26:27 - last edited 2024-08-06 02:57:56

  @kiwiatheist 

 

Hi, thanks for posting question here.

Smart Connect may be enabled, so you can only see one SSID.

Here are two methods that you can disable Smart Connect and set different wireless settings for 2.4GHz and 5GHz wifi band.

1. Login the web management interface, go to Advanced > Wireless > Wireless Settings, you should be able to disable the Smart Connect there.

2. Open the Tether APP on your phone and login the Router, go to Tools > Wireless Settings to disable it.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 472

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.