Please help the wifi is making me problems with my
I have some problems with my mesh
I have these Decos
3 X55 (one is the main principal, all of them connected by ethernet)
2 X60 (one connected by ethernet and other by Wifi)
1 X50 Outdoor (connected by Wifi)
And a TP-Link TL-SG108 8 Port Gigabit Unmanaged Ethernet Network Switch to do the ethernet connection with the Decos.
I have an internet service of 350MB (download/upload), and I have almost 60 appliances in my home like Echos(Alexas), security cameras (Eufy), Smart TVs, cellphones, computers, smart light switchs, etc..
The first problem is... only I get 200-250MB either in the Decos that are connected by ethernet, but never 300 or more.
The other problem is that I am suffering for example in the Smart TVs lost connection of the internet or very slow connection then I swith the wifi connection to the main router (the one of the internet company) and then fixes, another times I can´t do the connection with the Wifi of the Decos, with the security cameras always have a lot of connection problems, the image in the app was very slow or I can´t open the camera (image), so many problems with the connection for the cameras so I decided to connect them (almost all) the the Router of the Internet supplier and the problem was solved, the cameras are working fine since then, with the Smart Light Swtichs I have like 16 and some of them lose the internet connection so is frustrating because all works with Alexa, also have problem with the cellphones sometimes the internet is slow and other times can´t do connection with the Wifi of the Decos.
The fix that I do to solve all this is to restart the Decos and then all fine again but i need to do this several times in the day, also I set the restart in the night every day but then the problem to do this is in the morning some of the appliances don´t have internet connection.
So all this is very frustrating because I spent a ot of money to buy the Decos and the ethernet cable installation to have a very nice Wifi Mesh but I can´t have it as you see. =(
Any tips, suggestions or help can you give me to try to solve my problem?, really thank you so much in advance!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I have a mesh home network consisting of 4 Deco X55's which ! auto updated last night and I immediately had trouble with internet speeds. Tried rebooting them all through the app as well as hard reboots by disconnecting power to no avail. I have another backup router for another area of the house which was working fine,so I knew my ISP service was fine.
I Googled the issues and saw a number of people in same boat who did a factory reset of the all of their Deco satellites and said it fixed the problem. I didnt want to do that and saw one thing about making changes in the QoS settings and found that the "Total Bandwidth" was set to 0.1 mbps down and 0.1 mbps up, which is supposed to be total available bandwidth from your ISP. I simply changed both down and up to 1000 and it started working.
Looks like the firmware update reset the QOS seetings to 0.1Mbps and changing this to 1000 fixed the issue for sure.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi again bro, well after some weeks that my camers worked just fine after switched to AP mode, again is a pain to enter to almost all my cameras in the APP, only says "Searching Secure Channel" or "Preparing Video" and that is all, sometimes I can open the camera and see video, but almost all the times I can´t. What else do you think could be making this problem ?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1241
Replies: 24
Voters 0
No one has voted for it yet.